Bought a Kodac easyshare c743 Camera...there was no software to download pictures, only usb connection...since I don't have a Driver to install pictures...any suggestions on what to do about it...Thanks for much....Salli

You don't need any software.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or, despite what I said first, you can use any photo cataloging program such as Picasa.

If I remember correctly, you needed to install the software and the drivers before connecting the camera by USB cable. It should all have been done with the camera not connected.
If you did it while it was connected, you must try uninstaling the software, and going into Device Manager and finding the specific driver fot that camera and Kodak, and removing that too.
Then restart your PC and start fresh.
Do the Software and Driver installation without the camera being installed or attached.
Once you have done the installation of software and driver, then, following the instructions, you can attach the camera and it should work this time.

To transfer pics to your computer you will need to install the Kodak EasyShare software (you can download it at www.Kodak.com) and connect the camera to the computer via USB cable or a camera dock. To delete the photos press the Review button and then the Delete button. The camera will give you the option of deleting everything or a single pic.

I had part of this problem. Click on the "add pictures" button, and find your camera on the screen in the upper left hand part. THen choose the photos you want to download. That is how I do mine. If that doesn't work, just keep trying. I had to try for a LONGGGG time to get mine to load. I used to have to pay to get my photos on a disc..

Have you tried using an external card reader?

They look similar to this at Wal-Mart:
http://i.ehow.com/images/GlobalPhoto/Articles/4794433/120257_Full.jpg

I own a mac and always use an external usb card reader to download my pics and it works great. Also, I know that you need to get your pics off first, but you may need to reformat you card at some point so that it will read faster and work quicker in your camera.

For your software issue, have you tried download the software from kodak's website? The program shouldn't cause your apple to crash. I would try re-installing it from there website.

http://www.kodak.com/global/en/service/software/easyshare/en/dln_ekn026079.jhtml?pq-path=4509

yep sometimes driver conflict.
too much on PC.
get the card out and put it in one of those cheap usb card readers (drugstore, etc.)

just click the link below

http://www.advancecamera.com/repair

the link will help you to get the device repaired and serviced

Free estimates.

Reasonable rates.

Fast, friendly, and personal service.

Top quality repairs.

Advance Camera 1 Year Warranty

Your PC is not recognizing the camera... most likely because the appropriate Kodak driver is not installed. Download "KODAK EASYSHARE Software" from the following web page...

http://www.kodak.com/global/en/service/downloads/dln_ekn032551.jhtml?pq-path=9351/9352

Make sure you choose the right OS eg. XP

your computer may be to old just download a driver for your camera and it should work you can find it underfreeware if you search on google

I have Kodak EasyShare C613 camera. I have some nice pictures on the memory card. My WinXP recognizes the camera, but won't find any drivers for it. So camera is detected, software running, but i'm not able to transfer the pictures, because I can't connect to camera. Any ideas to solve this?