Is your remote the URC-4330? The listed remote uses 4-digit codes.
If the TV doesn't have additional features (VCR, DVD etc.), try the codes: 0054, 1254, 0030, 0179, 0187, 0096, 0020, 0186, 0386, 0024 . There is also a manual code search option (and a way to look up the code). For the URC-4330, press TV, then press and hold Set until the LED blinks twice. Release Set and press 9 9 1. After the LED blinks twice again, point the remote at the TV (with it on) and slowly press Power and TV in alternation. When the TV turns off, that is the first possible code. Press and hold Set until the LED blinks twice to save. Check if the remote controls additional functions for the TV. If it doesn't, repeat the code search.
Recalling the current code is similar to searching. Press 9 9 0 after entering the set mode. Press 1 (to get the first digit of the code) and wait 3 seconds, count the LED blinks (no blinks = 0). Repeat with 2, 3, and 4 to get the entire code.
You can find the manual and codes here:
http://www.oneforall.com/support/manual . Use the drop down menus to select Universal Remote and the URC-4330 (or other remote if you provided the wrong model but it is an One for All remote).
Please note that the codes in the remote are limited to those devices released at least 6 months before the remote was programmed.
I hope this helps.
Cindy Wells
which code is it I can't find it or figure it out
need to program a magnovax t.v. how do I do it? I am conneted to direct t.v.
×