Konica Minolta Magicolor 2300 DL

Replaced the drum yesterday and now it's printing Andy Warhol like quality pictures, there are some lines, pictures are very dark and mottled. Rebooted the machine several times to no avail. Help?

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.
Contributor
62 Answers

Clean the machine , and change the toner.

Posted on Jun 02, 2007

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Printing problem on a Konica Minolta 2530DL. Was printing fine until we printed a set of thick labels. Now the print quality is really poor on the right side of the paper. It is both streaking and...

sounds like a lable has gotten stuck in the fixing unit, you may need a tech to remove it, do not use any sharp tools to remove it ,this could cause damage to your roller,
good luck, tinyman

Read full answer

Jul 19, 2011 • Konica Minolta Magicolor 2530 DL Laser...

2helpful

1answer

My printer is printing a duplicate image along with the regular print and also the print is light in color and smears. Konica Minolta magicolor 2430 DL, any ideas on what I need to do. The residence is...

The most common issues for duplicate image is either
the drum or fuser. If you are able to measure the distance between the first line and its duplicate, i might be able to narrow it down.

thanks

Read full answer

Jun 02, 2010 • Konica Minolta magicolor 2430 DL Laser...

0helpful

1answer

I have magicolor 2300 DL.I just replaced Cyan

make sure your cartridge is not stuck and pushed in all the way in printer. If it gets struck it will dump ink out and waste it.

Read full answer

Aug 19, 2009 • Konica Minolta magicolor 2300DL Laser...

0helpful

1answer

Konica minolta magicolor 5440 dl printing with marks on paper

you have to replaced the drum unit or the fuser unit.

Read full answer

Aug 04, 2009 • Konica Minolta magicolor 5440 DL Laser...

1helpful

1answer

After replacing black toner cartridge printer displays Drum Low

Ask you companey that surives you printer to look at it

Read full answer

May 19, 2009 • Konica Minolta magicolor 2300DL Laser...

1helpful

1answer

After replacing black toner cartridge printer displays Drum Low

The drum and the black printer cartridge are two separate items. You will have to purchase a new drum for it. I just had to do the same thing and it ran me $150.00 at Staples.

Read full answer

May 19, 2009 • Konica Minolta magicolor 2430 DL Laser...

1helpful

1answer

Magicolor 2430 DL vertical white blank stripes

remove PC drum and under that you can see laser glass, clean it and reinstall.

Read full answer

Aug 28, 2008 • Konica Minolta magicolor 2430 DL Laser...

6helpful

1answer

Konica Minolta magicolor 2430DL

Open the top cover. Remove the drum (part with long green handle). Below the drum you will see a strip of glass about 4-5 inches long. Take a cloth and wipe across the glass.

This will normally clear up any white lines in your print.

Read full answer

Jul 11, 2008 • Konica Minolta magicolor 2430 DL Laser...

1helpful

1answer

Konica minolta magicolor 2400w printing proplem

pleas check transfer belt, and drum unit, probably these lines are caused by drum unit and you have to change it. also you can clean laser glass, what is under the drum unit. if both look fine you can also look at the fusing rollers.

Read full answer

May 14, 2008 • Konica Minolta Magicolor 2530 DL Laser...

1helpful

2answers

White Lines

My magicolor 2430 dl prints fine until i print a photo then it leaves vertical streaks down the page, how do I correct this and if its dirty how do i clean it.
jim

Read full answer

Jan 27, 2008 • Konica Minolta Magicolor 2530 DL Laser...