Step up i want to step up my computer with AMD ATHLON 64 X2 5600+ 2.90GZ AM2 BOX and with KINGSTON KVR1333D3N9K3/3G 3GB PC10666 1333MHZ VALUE RAM TRIPLE CHANNEL KIT. Can i do this.Thank you. I have the mainboard MSI 7030

According to the manufacturer's web-site:

http://www.gigabyte.com/products/product-page.aspx?pid=2695#ov

the motherboard supports it, and supports quad-core CPUs.

yes one will be for single channel ram the other for daul channel ram.if you have the acer owners manual it will tell witch ones are single and witch one is daul.

AMD Athlon™ X2 Dual-Core Processor
AMD Athlon™ 64 X2 Dual-Core Processor

are the best processors for this motherboard

hey i cant post a message on ere, can u help , once iv typed codes in iv pressed ok n it just flashes ok n store

Your existing CPU will not work with that motherboard. The AM2+/AM2 processor slot is for AMD processors only. For this motherboard, you will need one of the following processors: Phenom FX / Phenom / Athlon 64 FX / Athlon 64 X2

unfortunately, this board does not appear to have slots for upgrading its graphic card.

Model Brand ASUS Model M2N68-AM SE2 Supported CPU CPU Socket Type AM2+/AM2 CPU Type Phenom FX / Phenom / Athlon 64 FX / Athlon 64 X2 Chipsets North Bridge NV Geforce 7025 / nForce 630a chipset Memory Number of Memory Slots 2×240pin Memory Standard DDR2 1066 Maximum Memory Supported 4GB Storage Devices SATA 3Gb/s 2 SATA RAID 0/1/JBOD Onboard Audio Audio Chipset Realtek ALC662 Audio Channels 6 Channels Onboard LAN LAN Chipset RTL8201CP Max LAN Speed 10/100Mbps

You are stuck with the integrated card.

Usually this will happen due to an overheating problem. I would check ALL of your fans and make sure everything is working properly and that you are not overclocking anything that would cause issues as well.

specs for motherboard mach speed venom
Memory type ddr2 sdram
Memory slots 2 X 240 pin slots
Supported ram 800mhz 533mhz 400mhz 667mhz
I dont know if this will assist you in sorting problem out