I blew a fuse this morning in the outlet my Danby Portable AC unit is located in (DPAC12030) and since then it's been beeping with all kinds of "programming demons". I cannot power off with the front panel and my remote doesn't seem to work. It just goes from farenheit to celcius, up in temp, down in temp, etc. with no sign of stopping.
How can I reset this unit to stop the madness??!!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Regarding the AC , it does not come out or the air is present but does not become cold? These are details you should post because experts need a clear picture of it before any solution.
now i am posting this here but i will ash you a further info anyways!thanks,
Cris,the best on FIXYA
Here is a link to a 12,000 BTU, Danby Portable AC Unit. Since you failed to mention the model number of the unit you have, I can only guess that is the same as yours. In any event, all Danby Portable AC units work the same. You can download and print this manual for future reference.
Candy, if the fuse blew in the first place, it was either overloaded or the AC unit has an electrical short in it. However, it may not come on now, without turning the Master Switch on the AC unit OFF and unplugging it from the outlet. Wait 10 minutes before plugging it back in. Then turn the unit ON. If it functions properly then the problem is solved. If not, the circuit board in the unit has been fried and will have to be replaced. Also, be sure that only the AC is plugged in to this receptacle. More than one will overload the fuse/circuit.
Hope this information helped you. Please rate my reply.