Station preset on AWR1-1W bose radio

Question edited for typo 'Bosie', and text speak.
Question moved to Bose Wave Radio.

Yes you can.

Bose Wave Radio User Manual ' Page 17 / 30

https://www.manualsdir.com > ... > Radio > Wave Radio
mode. To manually tune in a station - Tap either Track/Tune. or. button quickly two or more times to tune the frequency in small steps. Or, press and hold ...

You can fix it yourself. The only problem you may have is disassembling the remote. Once you complete the dissembling, the repairing part is not difficult. you can do it.

When you're setting the alarm you should be able to choose any of the stations programmed into your radio. Just press radio to choose radio for the wakeup, and press one of the presets. You can also set the volume at which it comes on.

A good antenna connection and orientation and the presence of sufficiently strong stations might stop it. Look in the manual which is available at Bose.com

Go to Bose.com, find the xact product in the roll down and it will lead you to manuals.

The manual and supplemental are here:

http://www.retrevo.com/support/Bose-Wave-radio-Radios-manual/id/525bh044/t/2/

The FM antenna is the power cord. (Page 24). Extend it horizontally as much as you can.

Try to leae it on to help dry out all the circuits.

Here is your manual in PDF format:

http://www.bose.co.uk/GB/en/images/Wave%20Radio%20CD_tcm6-4104.pdf

To set AM/PM (12 hour) or Military (24 hour) time - With the system off, hold down Alarm Setup and press On/Off to switch between AM/PM (12 hour) and Military (24 hour) time formats.

To preset up to 6 AM and 6 FM stations - Use the Track/Tune buttons to find the desired station. Then, on the control panel only, hold down any Preset button until the preset number lights. The station is now preset to that number.

I found the answer on the Bose website in the manual for the radio. While the radio is on, hold down Alarm Setup and preset 1 at the same time. That will set it so the clock displays. If you do the same thing but hold down preset button 2, that will display the radio info all the time.

Use the tune arrow buttons on the remote - left arrow tunes down; right arrow tunes up.

Once you have the right frequency for the station you want to preset, press and hold the number button that you want to store it under for around 5 seconds