Need to put a few names/addresses in. It says memory full. Of what?

Hi Judith, you forgot to tell me what device you need help with. On a phone you can highlight a name... then go to EDIT CONTACT. then you will find where to add email address.

you can't send an email to contact without their full name, go back and add full name to contact , or inbox them and get their email address

first, save all the 20 email addresses in your contacts.
how to do it: 1. sign in to your yahoo account 2. in the middle left part of your email, click add contact 3. put all their email addresses together with their full name 4. now, instead of clicking new message or compose message, do directly to contacts and check all the email addresses of the 20 persons. then click send e-mail. you can also attached file if you want. hope this will help.

1. Go to "Settings" 2. Select "Mail, Contacts, Calendars" 3. Select "Add Account...." 4. Select "Yahoo! Mail" 5. Type for NAME (your user name), Address (full Yahoo email address), Password (your password), Description (do not type your yahoo email address, choose something different, like "My Yahoo Account")
The problem most likely is in the Description ... if you type your email address here, it may give the error that the server cannot connect. I changed mine to "My Account" and the server connected.
GL

1) If this is the first email account you're setting up on your iPhone, tap Mail. Otherwise, from the Home screen, tap Settings.
2) On the Settings screen, tap Mail.
3) On the Mail screen, under Accounts, tap Add Account.
4) On the Add Account screen, tap Other.
5) Select POP and then enter your account information using your keypad. Name Enter your name. Address Enter your email address. Description Enter a description of this email address. The description displays in your email account list on your iPhone. 6) Enter your Incoming Mail Server information.
Host Name Enter pop.secureserver.net. User Name Enter your full email address as your user name. Password Enter your password for your email account. 7) Enter your Outgoing Mail Server (SMTP) information.
Host Name Enter smtpout.secureserver.net. If you need to change your port, use one of the following for your outgoing mail server, depending on the port you want to use:

smtpout.secureserver.net:25
smtpout.secureserver.net:80
smtpout.secureserver.net:3535
User Name Enter your full email address as your user name. Password Enter your password for your email account. Note: The user name and password for your outgoing server is the same as the user name and password your entered for the incoming server.
8) If SSL mode is enabled, under Outgoing Mail Server (SMTP), tap Advanced.
9) Set Incoming Uses SSL and Outgoing Uses SSL to OFF.

here's how to add contact to the address book:

1. press FUNCTION key
2. select FAX/EMAIL SETTINGS icon
3. select ADDRESS BOOK
4. select ADD EMAIL ADDRESS
5. input your email address
6. input your name
7. select ok
8. input a key name
9. you can choose if you want to add it to favorites or not
10. press stop key to return to idle state

that's it :)

When adding Contacts to your Outlook Express, add the Display Name and Email address (double check that the email address is accurate) then, press the save button at the bottom of the screen on the right hand side. By pressing the Add button, you are telling the program that you wish to add a second email address for this person (Contact) and this may be what is causing your issue when trying to access contacts. Give it a try and if it works, please rate my response. Thanks!

OpenSource13

You're not doing anything wrong. The e-mail address is stored there in your address book. Outlook and Outlook Express just display this as the contacts name. It will still go through to their e-mail address.

To get the e-mail address, just double click their name.

Address Book
Contact List
There are two ways to enter Contact List.
1. Tap the [ ] in the idle screen then tap Address Book - Contact List.
2. Tap the [ ] key in the idle screen.
This menu allows you to save and manage contact address information. The
Contacts’ functions allow you to add a new address or search saved contact
addresses by name.
New Contact
This menu allows you to add a new contact address. You can enter contact
address information including name, phone numbers, email addresses, group
information items, memos, ring tones, and image (photograph).
Favorites
This menu allows you to have your own favorite contact list. You can add and
delete it.
Caller Groups
This menu allows you to manage group information. By default, there are 4
groups: family, friends, colleagues and school. You can also configure a ring
tone for a group so that the group ring tone sounds when a call from a specific
contact address within that group arrives and there is no ring tone configured
for the specific contact address.