Question about Lanier Office Equipment & Supplies

Open Question



Posted by Anonymous on


5 Related Answers


  • 446 Answers

SOURCE: Install Cyan Toner Error

ensure that the one you install is the exact model name and number, if this is correct, try unistallling once again and check one more time,

you might want to get a new cyan toner if this still fails, i dont think there is a prob in your machine, cheers

Posted on Aug 16, 2008



  • 1 Answer


Follow these steps (per Samsung Support) to reset cartirdge error:

Press Menu, #, 1934
Screen will read: Ready, Tech Mode
Press Menu until you see Data Setup
Arrow through till you see New Cartridge, enter yes and hit OK or enter

Now re-enter Menu, #, 1934 to get back to Regular Mode

Toner Empty message should be gone!

Good Luck!

Posted on Aug 20, 2008



  • 5 Answers

SOURCE: Hello I have a canon lbp2900

Just open the door and pull it out the toner cartridge, inside the printer in left hand side u will find a sensor in grey or while colour , from ur finger just check its functioning (up and down function) if it fails then open the back side cover there u will find one metal plate in silver colour open it and in right hand side there are sensors the cartridge sensor is also there only in right hand side refitted it and ur problem get resolved


Posted on Jul 30, 2009


  • 6 Answers

SOURCE: Konica minolta 2500w doesn't recognize that toner cartridge is installed

Sounds liKe the toner dust is bvlocking the sensors. see the following

Posted on Feb 26, 2010


  • 217 Answers

SOURCE: lexmark e250dn printer, toner light is flashing, new cartridge

Could be photoconductor at end of life.

You shoul still be able to do a printer test print (press the arrow button).

Look on the printed pagesfor Toner AND Photoconductor.

These show as OK when new or very low count, and 100% when fully used.

If the toner is showing as 100% when you've just replaced it, either the chip is faulty, the wrong one, or if the cartridge is a remanufactured one possibly nor been replaced.

Posted on Mar 30, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


Toner empty,toner low,no cartridge

hello, this is a appear when replace new toner
some time machine didnt recognize toner.
press menu#1934
display ready tech
press menu &left arrow key display new cartridge enter twice.
and restart machine error message is over

on Aug 14, 2010 | Office Equipment & Supplies

1 Answer


When replacing the toner cartridge, you MUST install a brand new, unused genuine Brother toner cartridge in order to reset the toner status. Swapping toner cartridges from one machine to another or installing a partially used toner cartridge may cause this problem. Brother machines control their image quality for the most suitable print quality by monitoring toner consumption. If you install a partially used toner cartridge, your Brother machine is unable to recognize toner consumption correctly which will cause this problem. Therefore, when you replace the toner cartridge, please use a brand new toner cartridge, not a partially used toner cartridge from another machine.

Jul 26, 2012 | Brother Office Equipment & Supplies

1 Answer

Independent-supply toner message

Treat the same as "Non-Genuine Toner". Caused by installing a refilled toner cartridge or taking out cartridge out, putting a new toner, and then putting the old one back in. Place a new toner in the machine, change SP5-051-001 to 1, and cycle power.

Jan 12, 2012 | Office Equipment & Supplies

1 Answer

Our printer is showing toner empty message and indication light is on , but still the pc print is coming, also the fax is directly going to memory instead of print

"but still the pc print is coming" do you mean that the prints are still coming out fine? - If so then this is a common experience, Printer manufacturers set a "lifetime" on the cartridge independent of the actual amount of ink/toner left in the cartridge. Their reasoning for this is "it guarantees high quality prints" - My personal feeling is it also grantees a revenue stream.

The way this "lifetime" is measured in your printer is by buring out a small fuse each time the cartridge is replaced. This then sets off a countdown which is decreased every time you print a page, when it reaches zero you will get the warning message you are experiencing.
As a solution you can either replace the toner cartridge.
Buy a new fuse.
Potentially bridge the fuse with something (however you will need to research if this is possible with your model).
You will need to re-fill / replace the toner cartridge soon. So depending upon the cost of your time and the cost of a new cartridge refilling may be a bit of a false economy, but for further info check out:

Best of luck,

Jun 17, 2011 | Samsung SCX-4216F All-In-One Laser Printer

1 Answer

Canon MF-6550 ''toner not set''

check properly to toner if there is some stickers left on it and put it tightly to recognize it...

Jul 17, 2009 | Office Equipment & Supplies

2 Answers

Samsung sf-5100 fax toner empty

I have a feeling that it is a re-manufactured or compatible cartridge??
There is a fuse that needs to be replaced on this unit. it blows when the cartridge is installed to reset the machine. If the fuse has not been replaced or is defective the machine will not recognize the new unit.

Mar 05, 2009 | Samsung SF-5100 Plain Paper Laser Fax

1 Answer

Can't receive fax but can send fax

I have a feeling that it is a re-manufactured or compatible cartridge??
There is a fuse that needs to be replaced on this unit. it blows when the cartridge is installed to reset the machine. If the fuse has not been replaced or is defective the machine will not recognize the new unit.

Feb 12, 2009 | Samsung SF-5100 Plain Paper Laser Fax

1 Answer

LDell 3100cn awer printer won't recognize new toner

Have you removed the plastic protection strip from the bottom of the toner?

Nov 14, 2008 | Dell 3100cn Laser Printer

2 Answers

Toner cartridge end of life message

Go to the menu on the physical printer. Go through the selections until you see it say change print cartridge. Follow until you see to change the black one.

Dec 07, 2006 | Konica Minolta magicolor 2300DL Laser...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lanier Office Equipment & Supplies Experts


Level 3 Expert

13434 Answers

Brad Brown

Level 3 Expert

18378 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you a Lanier Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides