Televison & Video Logo
Rachel Lulu Posted on May 31, 2007

Problem with BUSH 6685 VPL

My 3 weeks old BUSH 6685VPL has been working fine until today - I couldn't switch it on. The power indicator is on, but there is nothing coming up. I changed the betteries in the remote control - didn't work. Switched the power on and off - didn't work. Also tried to use the program up and down buttons on the side of the tv, still didn't didn't work. Can anyone help please!

  • Anonymous Feb 22, 2022

    The TV just needs a power reset. Switch it off at the plug and unplug it then press and hold the power button (at the back of the TV next to the headphone input) for 15 seconds. Wait 10 seconds before plugging the TV back in. Works every time.

×

2 Answers

A

Anonymous

No, I guess the tube is somehow broken. I had the TV exchanged.

Damien McColgan

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Jun 28, 2007
Damien McColgan
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Jun 28, 2007
Answers
1
Questions
1
Helped
761
Points
1

Hey, The same thing happened to me today. I've had the tv for about 3 months now. There's not much information available on this so I was wondering if by any chance you got your tv fixed? Thanks.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Blinking red lights 12 times Sony VPL-DW127.

See the indicator section on page 49 of manual

VPL-SX125/VPL-SW125 (sony.com)

and indicators section on page 20 of this manual

VPL-DX147-DX127-DW127 (sony.com)
1helpful
1answer

Where is the blower motor relay / control module located on a 92 gmc g2500 (Vandura)....before I went into the Drs. Today AC was working fine and when I came out and started the vehicle I had nothing...

There is no relay in this vehicle. Power flows from the fuse to the speed switch. For the slower speeds it then flows to the blower motor resistor and then to the blower motor and ground. For high speed power flows from the switch directly to the blower motor and then ground. Check for battery voltage at the switch on the Brown wire. That's incoming power. Also check for good ground on the black wire at the blower motor.
0helpful
1answer

Working on furnace. igniter not working even after replacing.

Check flame sensor , check hoses to pressure switch not split etc
0helpful
1answer

Bush 24 inch tv/dvd combi screen went blank as if it's on standby. won't respond to remote control. one week old. is it seroius?

try switching on tv point remote at the tv pressing the menu/exit button and holding for 10/20 seconds hope this works for you
1helpful
1answer

Sony vpl cs5 projector will not turn on now power what so ever... Fuse on main power board is fine and power is getting to the main board at the back of the projector (the board which runs the bulb) the...

Have you tried the following:

Connect the power cord and turn the projector to standby mode.

Press the following keys on the remote commander in the following order for

less than five seconds each: RESET, <,>, ENTER.

0helpful
1answer

Brand new viewsonic vnb130, worked fine for two weeks. Heard whirring noise today and then it boots up, gets to homepage beeps loudly on and off until it switches itself off about 30 seconds later.....

If your laptop is beeping it indicates a motherboard issue that can not be corrected without a technician. Since the laptop is under warranty I would return it with haste for exchange.
47helpful
2answers
0helpful
1answer
0helpful
2answers

SONY VPL-ES1 DATA PROJECTOR

I have same problem. There is light on power led. 2 hours of standby doesn't work..
0helpful
1answer

It just wont turn on

Hi,

Pls open the Lamp unit and check it if it is giving the power indication on the panel.

Viren
Not finding what you are looking for?

771 views

Ask a Question

Usually answered in minutes!

Top Bush Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1259 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

john h

Level 3 Expert

29494 Answers

Are you a Bush Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...