I plug in the power source, however the unit will not turn on
SOURCE: Fujitsu Plasmavision 55"
Hi, The problem comes from the power supply board. The power supply board is a three phase unit. One phase on the power supply failed, that would be the reason for the no picture. You can have the power supply board repair or replace. If you are within the manufacturer warranty, they "should" replace the part ( power supply board) at no cost to you. Mike
SOURCE: Stuck on Standby, Fujitsu Plasmavision: Model pds4229e-b
I had exactly the same problem with a Fujitsu General PDS4208E. After looking at the forums etc bit the bullet and tracked down an ORIGINAL remote. Paid yesterday, arrived today - batteries in...screen back on!! One proviso here: Before you pay big money for an original remote (and ONLY they will work with these 2nd generation plasma screens not universal remotes) make sure that your screen WAS working before it was in the standby mode. try http://www.portables.co.uk/ on +44 208 968 1444. Ask for Andy. He seemed to know what he was talking about. About £50 +VAT plus next day delivery charge. Alternatively borrow mine at £5 a button press!! ;-))
SOURCE: My fujitsu PDS 6101 plasmavision
the top of the screen is not normal when i turn on the computer a google toolbar comes up
SOURCE: Fujitsu Plasmavision 42 42
No not power supply, it's the X and Y sustain boards. These boards have to be replaced as a pair.
Contact Fujitsu for a repair of this unit.
SOURCE: Is there a power reset
no reset button in plasma tv email me what you tv is doing and i can probally help you fix it [email protected]
225 views
Usually answered in minutes!
×