I am having problem with my Canon Power shot A310. I can't take any photo because no display is coming on my LCD my LCD is showing only black grains. but some time its working normally. but some time not working. My LCD is good because only photo shot mode only LCD not showing the image
An expert who has achieved level 3 by getting 1000 points
This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:
http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html
http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819
Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110
Posted on Nov 17, 2007
Here's a revised link:
http://camerarepair.blogspot.com/2007/11...
×
101 views
Usually answered in minutes!
I sent my camera to the repair center after calling the 800 number. It was a bad video display. Covered by factory. No cost except shipping. Works fine now.
I have purchased a canon made digital camera model No. PowerShot A310 from Ambey Computers Shahjahanpur more than 2 years ago. Now the camera is creating problem to shoot the pictures. Only the recorded pictures on the memory card are displayed at LCD but focussed pictured are not displayed at the screen to shootout.
I have contacted the seller with this problem and he took the camera to send it to the company office at Lucknow, where he originally ordered for purchase. But last month he returned the camera after three months delay with the remark that the camera is not repaired at Lucknow, please send it to Delhi.
Please advise me for repair of the camera. What should I do and what type of the problem is with this camera. Please also advise me the proper place and cost of repair.
Thanking you.
Yours sincerely,
Nasir Ali Khan
Email- [email protected]
State Bank of India,
RBO 3, Town Hall
Shahjahanpur
When I turn on my A310 Canon, I am able to view pictures already taken,but when I try to actually take a picture my LCD screen doesn't show anything, it is just a dim grey display. I can see all the display features I can use but there is no picture preview at all. I have changed batteries, and have done everything thing setting wise I can think of. Any suggestions?
Thanks,
BK
My canon camera can turn on but the LCD screen stays black and doesn't do anything all you can see iz the flashing green lights and when you press a button ot stop flashing. What do I do!? And i've changed the batteries serveral times
×