Question about TP-LINK Tenda W311R WirelessN Router AP 4port Switch 150Mbps

1 Answer

Tenda router input eror

My router will not connect to my windstream modem and the internet. when i go to 192.168.0.1 to setup, the page asks for my username and password provided by my isp. when i enter them it goes to the same page and the top says input error. I've tried all of the troubleshooting tips found online and nothing works.

Posted by abowers22 on

Ad

1 Answer

C. Dante

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 623 Answers

It's not the username and password from your ISP. If you try to access your router and you have not changed anything, use the following values:
username = admin
password = admin

Once in the router interface, you will have to configure the router for your DSL-modem (I guess it's DSL since Windstream does not produce cable modems.)
Here fill in the username and password your ISP provided you with.

Let me know if you have any questions.

Posted on Nov 14, 2012

Ad

5 Related Answers

clare su

  • 1 Answer

SOURCE: After using TP-Link TL-R480t+ Router Video streaming from internet at sites such as youtube does not work at all

Hi ,This is Clare Su from TP-LINK support technical force.To you issue,I have the following recommendations:1. try to use only one line to connect to the internet,and see if you can watch the video on youtube2.if you can see the video with one line connected to the internet.Then,you can get another internet line with the router.And you can try to set the rule to the website: youtube, let the flow from youtube come in and out just from one wan port.if you can't solve the issue with my recommendation,you can email me. I will help youas soon as possible.My email is:clare.su from tp-link.com

Posted on Nov 23, 2011

Ad

SOURCE: trying to set up for

You can also configure it with below method.
Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. Then click on WAN settings set it as your internet service provider settings enable DHCP Then click on wireless and enable it. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Posted on Apr 20, 2011

male_28_cam

Aruna Singh

  • 1555 Answers

SOURCE: I have a TP-Link TL-WR941ND

Can you kindly let me know the settings on your modem and router. Whether they are connected via using bridging mode or ppoe mode. In order to find this simply enter 192.168.1.1 in your browser and enter user id as admin and password as admin and hit enter. In advanced lan settings just click on first right hand side edit button and click next and see wether ppoe is selected or bridging is selected in order to ascertain the ip of wifi modem simply click on start button when connected to internet via wifi modem and select run type cmd and hit enter in the black window type tracert www.google.com wait for few seconds the first ip in the list will be your modems ip. use the same method as described above to find which way is it connected to server bridging or ppoe.

Posted on Jun 15, 2011

gab zambito

  • 98 Answers

SOURCE: My tp-link TD-W8950ND 150Mbps Wireless Lite

this is because your modem is out dated your better off getting a new one

Posted on Mar 20, 2011

harjan2010

  • 1 Answer

SOURCE: I have TP LINK WAIRLESS

If after Reset that problem still remains, as a browser use Opera !!!

Posted on Jan 13, 2012

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I recently installed a netgear wndr3300 router at my home. I went through the setup process with no problem, and everything checked out ok. But when i clicked finished, a screen popped up saying the ip...


Hi there,

If this is the case, the setup wizard detected an IP conflict between the router and the modem. It means that the modems IP address is in the same range as you router so it has to be changed. If the IP address of your router was changed to 10.0.0.1 , you should be able to connect to the internet. Try accessing the routers setup page by opening a browser and type 10.0.0.1 at the address bar. It will ask you for a username or password. Type admin for the username and password for password (this is the default settings). If it does not work try to remember if you already have changed the username or password. Once you are in, enable the mac clone option. Check if it works.

Apr 18, 2011 | NetGear WNDR3300 - RangeMax Dual Band...

1 Answer

My son gave me an older computer and wireless Linksys-G model WRT54GS router. I bought my wife a ipod for christmas and in the setup of the ipod it is asking for a password for the router. My son does not...


Reset the router to default....the default username and password is usually on the bottom of the router..then open a web page on your pc and connect the router with a network cable..type 192.168.0.1 or 192.168.1.1
Use the generic name and password to logon....once logged in, configure username and password and wifi...once setup..save and exit..disconnect and connect router to internet modem...log onto pc and look for your wifi neteork name..cheers

Jan 24, 2018 | Linksys Wireless-G WRT54GS Router...

2 Answers

I am trying to configure my netgear router to work with my dsl motorola modem


You can access your wireless router by first running you ethernet cable from pc to wireless, then in address bar, type 192.168.1.1 and this will enter the wireless router's software. If it asks for username and password, try typing admin for both.

Sep 03, 2009 | NetGear WGR614 Wireless Router

1 Answer

The modem's been changed and cannot locate the CD to the driver to connect to the internet. The model is DSL-G604T/AU V.A3.


Hi! your dlink dsl-604T is adsl router modem, you can access the setup page of your modem router by connecting your computer directly to the port1 of the modem router and the cable from your isp should be connected to the WAN port. u need to pull up the browser and type in at the url:192.168.1.1 and it will ask the username and password, by default the username is admin and the password is 1234 or leave it blank, but i suggest before u do this steps. u need to reset your modem/router. there is a reset button on the back of the router and press it for 20secs and then unplug and replug it after 10secs. after that u can pull up the setup page of the router.. to check the default gateway of the router, right click the network icon on the lower right of the task bar and select status and it will show the ip address, subnet and default gateway..

u need to know what internet settings u have with your internet provider, bcoz once u access the setup wizard it will ask u the type like auto-dhcp, pppoe, static etc.. if your isp gives u a username and pass to connect to internet u have to select pppoe or if u are given a static ip address setting u need to select static ip... just follow the setup wizard..

Aug 17, 2009 | D-Link DSL-G604T Wireless Router

1 Answer

How to use bellsouth router on windstream internet


yes you have to configure it with the dsl modem plug your modem ether net cable into routers ethernet,open your modem configuration page by typing 192.168.1.1 login by using by default the router login are "admin"and pass word is also" admin" note down dns setting and other setting which yopu may need tosupply the router now open router login page and supply required connection setting change set router default address 192.168.1.2 soit should not conflict whith each other supply dns setting, enable wireless ,set wireless secuirty ,try now [email protected]

Aug 16, 2009 | Westell Wirespeed VersaLink...

1 Answer

Zyxel to connect automatically


Connect your modem to internet port of the router and your computer to any numbered slot.Now open 192.168.1.1 in your internet explorer,it will ask for username and password.Leave the username blank and in password type admin.You will get the linksys page.On the setup page you can see internet connection type.select PPPoE from the drop down menu.In username and password enter the username and password which you use in dialing broadband.Scroll down and click on save settings.Turn off the router and modem.Power up your modem first and then router.Now you wont need to dial broadband.You will be connected automatically.

Mar 27, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Connecting a Linksys Cable/DSL Router to a speedstream modem


I have a steps by step guide on how you setup the router.

  1. First you need to connect the device together. You need to connect your cable modem to the internet port on the back of the router, and the computer should go to one of the 4-port on the router labeled Ethernet (1, 2, 3, 4).
  2. Then turn on the modem first, wait for the lights to stabilize before powering on the Linksys router.
3. If the internet is still not working; we will need to adjust a setting on the router setup page. To access the setup page of the router you need to open your internet explorer or Firefox on the computer that is hardwired directly to the router. In the address bar of your browser (Internet Explorer or Firefox) type http://192.168.1.1/ and hit enter or click Go. It will ask you for a username and password. Just type "admin" for the password field and there is no username. If you have ran the setup CD prior to this, then use the password that you have set when were running the setup CD.



4. Once you are in the setup page of your router make sure that the Internet Connection Type is set to Automatic Configuration DHCP, then click the save the settings button at the bottom of the page. After saving the settings, click the sub tab at the very top of the page that says MAC Address Clone. Set it to enable and click the button that will say Clone or Clone your PC's MAC and save the settings again.
5. After doing step 4, do a power cycle. Power cycle is done by turning of the router, modem and computer. Leave them off for a minute, tuned them back on in this order. Modem first wait for the lights to stabilize, then the router wait until the power light become solid. Then turn on the computer. This will get you online through the router.


Check if this will help get the router online.


Jan 03, 2009 | Siemens SpeedStream Modem (4100) (SS4100)

1 Answer

I dont know haow to connect Linksys Wireless-G Broadband Router with SpeedBooster WRT54GS - wireless router


  1. Connect your modem to the Internet port of the router. Your computer needs to be connected to one of the 4 Ethernet ports at the back of the router.
  2. Access the router's setup page by launching Internet explorer and typing 192.168.1.1.
  3. It will ask for a username and password. Leave the username blank and password is admin.
  4. Once your in the setup page, set "Internet connection type" with what your ISP requires you to have.
  5. If you have cable ISP, usually it is "Automatic Configuration-DHCP."
  6. But if you have DSL ISP, then it will be PPPoE. You need to know your username and password from your ISP.
  7. Better yet, verify your Internet connection type from your Internet service provider.
Hope this helps!

Nov 09, 2008 | Computers & Internet

1 Answer

Installed WRT54G2 With ATT Motorola DSL and cannect to internet. dsl worked fine before installing the Modem had AT&T recheck the dsl and was configeration correct was advised that my problem in...


hi there ...

your isp is at&t? please verify the ip address straight to the modem if its is 192.168.1.1 and if your modem from your isp is set to DHCP or BRIDGE mode.

IF IP address is 192.168.1.1 (DHCP)
... change the LAN IP address of the router to 192.168.2.1 or 5.1 to prevent any IP conflict
by doing this :

1. access setup page of router usually 192.168.1.1
2. under setup tab look for the ip address, change it, then save
3. click on the status tab , and look for a VALID ip address

IF MODEM is set to BRIDGE mode
.... please ask username and password from your ISP coz we would need to set your router to PPOE...
1. access setup page
2. under setup tab look for INTERNET CONNECTION TYPE
3. select PPPoE
fill in username and password
select "keep"alive
save
4. click on status tab
look for LOG in TYPe ===> click CONNECT
if connected : check a valid IP address
if authentication failed verify again your username and password from your ISP

Goodluck!


Aug 07, 2008 | Linksys WRT54GX2 Wireless-G Broadband...

1 Answer

Can't connect or even get past setup.


hmmm...

ok, first question:  Are you running the setup CD while the computer has a physical cable connecting it to the router, or are you trying to do this completely over wireless?'

For most wireless routers, initial setup works best using a physical cable.

also, it's possible that the manual reversed username and password:  try USERNAME Admin, BLANK password.

Mar 27, 2008 | Linksys Wireless-G WRT54GX Router...

Not finding what you are looking for?
TP-LINK Tenda W311R WirelessN Router AP 4port Switch 150Mbps Logo

763 people viewed this question

Ask a Question

Usually answered in minutes!

Top TP-LINK Computers & Internet Experts

Zaid Anarwala
Zaid Anarwala

Level 3 Expert

457 Answers

Lawrence Oravetz

Level 3 Expert

10548 Answers

Vernon Taylor

Level 3 Expert

6954 Answers

Are you a TP-LINK Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...