Not responding......help Hi all. My navman pin 570 is not reacting when I tap the screen. I have done a hard reset, and when it wants me to tap the screen, it doesn''t respond. Sometimes it reacts ONCE, and then.........nothing. What the @#%+$ is wrong?? Has anybody ever heard about this, or maybe someona has a plan....
Please......... =)
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Try Start Settings System GPS and tap ON before starting the satnav program. Not all programs automatically switch on the GPS. On hitting ON yellow light top left starts flashing. Now start your satnav program..
tap on "GPS Status" (second page of GPS software) and be sure that the box is checked in the upper left hand corner. In the same screen, be sure com 8 and 9600 (baud rate) is shown.
On the main menu (Start-- Win Logo) go to settings. Then go to system at the bottom of the screen. Tap on Power. At the very bottom of the screen in small print go to "Adjust Backlight settings to conserve power". Click on "backlight" in blue print.
maybe there is no memory caused by a flat or stuffed lithium battery or battery charging circuit in the pin 570. fix: leave unit to charge for 24 h if the battery still dosnt charge because it is over discharged, then you may be able to push some charge in it after the battery is unplugged, after opening the case, and removing the circuit board.
×