When i am giving print command print is not obtain in the default language (english) as well as only few words are print like ?????000,other symbols and caracters in a single page and took multiple pages to print given data.
Hi, you may want to reset/restore the Epson LX300 to default settings. This can be done by pressing down on the FONT button while powering on the printer. If done right the LX300 will print a test page with the firmware version. It is also possible that the drivers are corrupted. In Start, Printers & Faxes, delete the LX300 printer, restart your PC and then re-install via Add Printer. In some cases, defective parallel cable can also cause problems. Unfortunately the only sure way of checking is by replacing the printer/parallel cable with a known good/operation cable. If the printer would really be requiring service, a Service Manual is available at (http://www.eserviceinfo.com/index.php?what=search2&searchstring=DPA-300) Hope this be of some help to you. Good luck and pls post again how things turn up.
1,041 views
Usually answered in minutes!
Thanx,My driver is corrupted i have uninstalled it & then reinstalled. Its worked now i am getting print in my default language.
×