Can't hear caller or dial-tone --Extremely faint but volume doesn' t help
My phone has the faintest sound on the other end. The dial tone and any caller or tone is barely audible. It didn't use to be this way. We haven't had the phone set that long. The volume doesn't help whatsoever. I have it sent on the highest (3) setting and it sounds terrible. Please, help. I can't locate my user's manual.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Most likely that it is the speaker on the handheld part of the phone. Your sound comes from the base itself when you put your current connection on Speaker-Call. So if you cannot hear the dial tone OR the person on the other end unless on "speaker" it's just the handheld and I believe there are places online you can purchase JUST that part if needed.
After you enter *67, you hear the dial tone. Dial the outbound number. Your caller ID is not presented on the receiving end.
After you enter *82, you hear the dial tone. Dial the outbound number. Your caller ID is presented on the receiving end.
. Press and hold the dial/menu button until "Options Menu" is shown in the display. 2. Use the up/down buttons to scroll through the options below, and press the dial/menu button to select the desired option you wish to set: • Set Language • Local Area Code • Set Time/Date • Set Flash Time • LED Contrast • Set Tone/Pulse • Exit Options 3. Use the up/down buttons to adjust the setting, and press the dial/menu button to confirm and set. NOTE: It is important to set the Area code so that the telephone can distinguish local or long distance calls when dialing from the Caller ID list. NOTE: Time and Date will automatically set when you recieve the first or second Caller ID
The switch that the handpiece activates is not working. Could be optical, magnetic or physical. It may need cleaning, adjusting or a wire connection repaired. Also check the curly cord and its connections between the handpiece and telephone.
1) When the phone is in the standby mode, press menu/mute.
2) Press - to move the pointer to “Dial Mode”.
3) Press select/ch and the display will show the current setting.
(The initial setting is Tone.)
4) Press + or - to change the selection.
5) Press select/ch and a confirmation tone will sound.
6) Press end to exit.
From the Handset Setup Menu: 1. Press the caller ID-volume ( 5 or 6) button to scroll to the TONE PULSE sub-menu. 2. Press mute/program button to enter the menu. TONE/PULSE 41TONE 2PULSE shows in the display. The default setting is “1 TONE”. 3. Use the touch-tone pad or caller ID-volume ( 5 or 6) to enter 1 TONE or 2 PULSE. 4. Press the mute/program button to confirm. You will hear a confirmation tone and your selection shows in the display.
I have the reverse problem. Callers can hardly hear me.
I saw a setting in the headunit that allows you to specify where the audio plays for incoming calls. You can choose the Left Front Speaker, the Right Front Speaker or Both. Check the manual and make sure its set to both.