- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
hi you have problem with fuser unit may be some time this problem came when yours copier is 220v and you have put in 110v if u dont then u have problen in fuser unit may be broken lamp or thermal fuse thanks
The main thermistor reading does not reach 40°C 14 sec after the fixing heater goes ON. (fixing low temperature error)
If E000 is indicated, the RAM on the image processor will retain the error memory of the fixing assembly after the power switch has been turned off an then on. Execute the following in service mode, and turn off and then on the power switch to clear the memory: #7 PRINTER>#4 PRINTER RESET>YES=(*).
Entering service mode: press "aditional function" and after "#(ID)"
Note: To reset E000, E001, E002, E003, go to service mode 4. select SET, go to
"#7 PRINT-ER," in service mode. Then press Execute "#4 PRINTER
RESET." Power the unit off/on.
×