PARTIAL IMAGE I SCAN SIGNATURES INTO THE QUALIFIED VOTER DATABASE. WHEN I HIT THE SIGNATURE BUTTON, IT AUTOMATICALLY STARTS THE SCAN. IT USED TO SCAN THE ENTIRE 8.5 X5.5 PAGE. NOW IT ONLY SCANS APPROXIMATELY 1" X 4-5" AT THE TOP LEFT OF THE SCREEN.

Add a signature to your text messages using these steps.

1. Open the "Messaging" apps.
2. Press the "Menu" located at the upper-right corner of the screen.
3. Choose "Settings".
4. Tap "Add signature to messages" to enable text message signatures, then tap "Edit signature text".
5. Type your desired signature, then select "OK".

Your signature will now be automatically added to each text message you send.

Otherwise, you can use applications from the Google Play Store - SMS Signature is a good one to try!

From Outlook 2011 (for Mac)'s help:
You can set a default signature for each of your mail accounts.

1. On the Outlook menu, click Preferences.
2. Under E-mail, click Signatures .
3. Click Default Signatures.
4. Under Account, select the account for which you want to set a default signature.
5. Under Default signature, click the pop-up menu in the selected row, and then click a signature name.

Note If you have multiple accounts, you must set the default signature separately for each account. If you open Outlook's Help and select Signatures and Formatting and look around for what you need.

Text message signatures are the post scripts at the end of text messages. Some people use text message signatures to provide an unrelated, off-top status update to the recipients of their text messages. Other people use text message signatures to attach a favorite quote with every outgoing message. If you own Pantech's Link handset, you use the device's messaging templates to attach a signature to your text messages.

steps:

Press the right "-" button to access the Link's menu. Use the handset's directional pad to navigate to "Messaging" option in the menu. Press the center of the directional pad, the "OK" button, to select the "Messaging" option.

2

Select the "Templates" option from the "Messaging" menu, using the directional keypad. Select "Options" from the "Templates" menu, using the left "-" button and then select "Add New."

3

Key in your text message signature using the Link's QWERTY keypad. Select "Options" with the left "-" and then select "Save" from the "Options" menu.

4

Press the red "End" button to exit the "Templates" menu. Press the right "-" button to return to the Link's main menu. Select the "Messaging" option from the menu.

5

Select the "Create Message" option in the "Messaging" menu. Compose your message with the Link's QWERTY keypad.

6

Select the "Insert" option before sending your text message. Select the "Templates" from the "Insert" menu. Select your text signature from the list of available templates and then select the "Send" option to transmit your text message.

You can scan your signature and save it as a jpeg or gif image file.
To add your signature onto a Word document, just place a picture (your scanned signature) on the document where you want your signature to appear.
If you want to send this Word document via e-mail as an attachment, I suggest you create a PDF file of your Word document and send the PDF file as the attachment.
If you send the Word document with your signature, the person who receives this can not only open your document using Word BUT can also access your signature image and can use it without your authorization.

Hi, Follow these steps to remove the signature:- 1.Open the MS word document that contains the signature you want to remove. 2.Click the Microsoft Office Button, point to Prepare, and then click View Signatures. 3.In the Signatures task pane, point to the signature that you want to remove, click the arrow that appears on the right, and then click Remove Signature. 4.When you are asked if you want to permanently remove the signature, click Yes. This will remove the signature.
Thanks! mannu_rakesh

have you installed all the scanning software that came with the scanner, Install them and go through these steps to scan a document using Twain;

Overview of the Basic Procedure
This section outlines the basic scanning procedure using a TWAIN-compliant application. For detailed procedure, see the Scanning an Image.
Make sure the CX6600's power cord is plugged in.
Place your materials on the document table.
Start a TWAIN-compliant application.
In the application, open EPSON Scan.
Full Auto Mode:
EPSON Scan automatically previews the images and recognizes the document source and type. images are automatically optimized and scanned.
Home Mode or Professional Mode:
Make settings to optimize images and click Scan.
The scanned images are sent to the application.
Save the scanned images in the application.

Scanning / How to Scan
Scanning an Image
Turning on the CX6600
Placing your materials on the document table
Starting the software and scanning an image
EPSON Scan provides three modes for you to make any scanning settings; Full Auto Mode, Home Mode, and Professional Mode. This section describes how to scan an image in the Full Auto Mode. The Full Auto Mode lets you scan images using automatically-adjusted settings. For more details, see Choosing a Scanning Mode.
Note:

You cannot scan an image with a size that exceeds the available memory or disk space. If you try to scan the image, an alert appears on the screen.
Note for Macintosh users:

Most illustrations shown in this section are for Windows, so they may vary in appearance from what actually appears on your screen. The instructions are the same, except as noted.
Caution:

Before starting the following steps, make sure that all the necessary software including EPSON Scan has been installed. For details about how to install the software, see the Start Here sheet.
Turning on the CX6600
Before turning on the CX6600, make sure it is connected to your computer.
Press the On button to turn on the CX6600. All mode lights flash, then the mode button for the mode you used last lights, meaning it has completed its initialization.

Placing your materials on the document table
You can scan reflective documents (like photos or paper). See Placing Photos and Documents on the Document Table.

Starting the software and scanning an image
You can start EPSON Scan in the following ways.
* Start EPSON Scan directly as a stand alone application
* Start EPSON Scan from a TWAIN-compliant application
This section provides information on how to start EPSON Scan from ArcSoft PhotoImpression. For details on starting EPSON Scan as a stand-alone application, see Starting EPSON Scan.
Note; if you are using Windows 98:

ArcSoft PhotoImpression 5 supports Windows 98 Second Edition or later. For version earlier than Windows 98 Second Edition, use EPSON Scan or other TWAIN compliant applications. See Starting EPSON Scan for details.
Start ArcSoft PhotoImpression.
For Windows users:
Click Start, point to All Programs (for Windows XP users) or Programs (for Windows 98, Me, or 2000 users), and select ArcSoft PhotoImpression 5. Click PhotoImpression 5.
For Macintosh users:
Double-click the Applications folder on your Macintosh HD, then double-click the PhotoImpression folder. Finally, double-click the PhotoImpression 5 icon.
Click the Camera/Scanner button.
Select a file format, location, and file name, then click Epson Stylus CX6600. EPSON Scan starts. See File formats for information on file formats.
Note for Windows XP users:

Do not choose WIA-Epson Stylus CX6600 from the menu to select the CX6600. If you select it, you cannot use the Epson scanner function fully.
EPSON Scan automatically previews the image, and recognizes the document source and type.
If you want to select more settings, click Pause, then click Options to open the Options dialog box. For more details on settings, click the Help button in the Option dialog box.
After EPSON Scan has previewed and recognized the document type, the following window appears. You can see the document type in the window.
EPSON Scan automatically locates the target images, modifies their skew, and starts scanning.
Caution:

Do not open the scanner unit during scanning or copying; otherwise, you may damage the CX6600.
Note:

Be aware that clicking Cancel on this screen closes EPSON Scan.
The scanned image is sent to ArcSoft PhotoImpression.
Note:

* Depending on the image you want to scan, you may not get the expected scanned image. In this case, scan the image in the Home Mode or Professional Mode.

* When you scan in the Full Auto Mode, black and white documents might be recognized as a color document. In this case, scan the image in the Home Mode or Professional Mode.
If you still experience problem scanning, un-install the entire software and re-install them all over. Install all the packages in the CD. Cheers!

just throw it away

etrust anti virus to down load exact location pl advise