I am sure konka made this misakai 32 inch tv. I could send you schematics there not helping me. Tv wont power up. Relay is not picking up. I have 170 volts at bridge cant figure out what turns on the relay, half the components shown on the print are not on the board. I have basic electronics and weak blue print reading skills but I am determined to fix it. Any advice.
If you have a switching power supply then you may have a problem with it. Also maybe a short on its load. The relay may be used only to de-magnetize the pic tube. If the set is also controlled by a micro processor then the stand -by voltage could be missing. There are so many possibilities that it's difficult to tell exactly what is happening. These are only a few things that may be wrong. Stargazer
Posted on Jun 02, 2007
Feb 03, 2016 | Konka K2001UM TV
Oct 23, 2010 | Konka KDL32AT23U 32 in. LCD Television
Jun 24, 2010 | Konka KDL32AT23U 32 in. LCD Television
Nov 01, 2008 | Toshiba 32AF41 32" TV
Feb 13, 2008 | Konka KDL32AT23U 32 in. LCD Television
Nov 14, 2007 | Konka KDL32AT23U 32 in. LCD Television
Oct 16, 2007 | Konka K2001UM TV
Sep 28, 2007 | Konka K2786U 27" TV
May 11, 2007 | Konka K2001UM TV
280 people viewed this question
Usually answered in minutes!
I have the same problem with my Misakai Model mTV3201 32" TV.Manufacture date August 2005
I have similar problem for my Konko K3288U and cannot find a schematic. If you can email me a copy I would appreciate it, if not can you tell me where I need to go to find one? [email protected]
×