Mdp 1760 - car adaptor wont work-universal quit also

You can find one here and they claim it has a longer life then the original. http://www.officedepot.com/a/products/363190/Lenmar-Battery-For-Initial-IDM-1731/?cm_mmc=Mercent-_-Google-_-Power_Protection_and_Batteries-_-363190&mr:trackingCode=5154DB1A-EC81-DE11-B7F3-0019B9C043EB&mr:referralID=NA

You can buy a new one by clicking on the hyperlink:
buy replacement ac adapter power charger cord for MINTEK MDP-1815 MDP1815

If you look at your DVD player, it will have information such as 5V, 2.2A. This information will help you choose the correct AC adaptor. Head over to The Source, FutureShop, BestBuy, etc and bring the DVD player in.

As for a universal AC adaptor. These range from $15 - $50. Just make sure the one you get has the correct plug and voltage/amp range and polarity for it. The salesperson should be able to help.

Here is a picture of such an adaptor. This is a picture of the back of an electronic device, showing 5V and the polarity. If your player has no information with the AC port, you will need to look for a label on the device with this information.

check the input voltage and check to see if radio shack has a universil adapter to fitit! they should have somthing compable...most lickly its 12 volts

yes,is same

Take your unit into Radio Shack. They should be able to match one up for you.

Unfortunately, Mintek seems to have gone out of business, so there is no way to purchase replacement parts without finding them online somewhere.

The problem could be caused by one of three things:

1. The battery is dead and cannot be recharged
2. One of the battery connections is broken in some way
3. The cord is bad and will not provide power

If the battery is dead, you're stuck with keeping it plugged in or trying to find a battery online. If one of the battery connections is bad, the only way to test it is with a new battery and you're back to finding one online. If the cord is bad, it wouldn't provide power at all, so it sounds like both of your cords are fine.

1. POWER ON

2. PRESS ‘SET-UP’ BUTTON

3. SELECT THE ‘PREFERENCES’ MENU (PRESS CENTER ARROW BUTTON THIS IS THE ENTER BUTTON)

4. INPUT THE PASSWORD CODE 224455

5. PRESS ‘LEFT’ AND ‘DOWN’ BUTTON (NOW THE SCREEN WILL SHOW ‘REGION CODE 1’)

6. PRESS NUMBER BUTTON (2 TO 6) TO CHANGE ZONE. (TRY 10/0 BUTTON FIRST, IF ACCEPTED THEN PRESS SETUP, YOUR PLAYER IS NOW REGION FREE)

7. PRESS ‘SETUP’ BUTTON TO EXIT.

Download the user guide from here

My Mintek MDP-1760 try to loading the dik and later show a mesage NO DISC... what is the proble?