Help me , my camera turns on and lens goes back in. on the screen is the message D: 5Fo8
5E02
5F08
5E02
what is going on. Olympus doesnt seem to have a clue
the micro chip's firmware has detected some fault which may be mechanical in nature. try this: hold down the shutter closed button then turn camera on...if it allows this sequence? basically, try anything out of the ordinary during power up including a rapid shaking.the micro chip's firmware has detected some fault which may be mechanical in nature. try this: hold down the shutter closed button then turn camera on...if it allows this sequence? basically, try anything out of the ordinary during power up including a rapid shaking.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi, The black screen problem means the lens sensor is spoiled due to over exposure to heat. Its better to give it to Olympus service centre. If your camera is under warranty period its well and good they will replace the lens sensor for free of cost. Thank you
hi alexandra olympus cameras are know for having a few lens problems when ever a blue screen comes on the camera is faulty it sounds to me like you have some dirt or dust in the lens i have seen this problem a few times hope u get it sorted goodluck
cant find a small pinhole, please try again but thanks for quick response
changed a cracked screen on a olympus stylus 600 now no black screen, why?
×