Question about ViewSonic VX900 19" LCD Monitor

PC starts fine, then the montor blinks and no display. light stays green

I have a VX900 monitor, I'v connected the monitor to other working PC's and what happens is that the monitor amber light comes on stays green but then the display go black, I turn the monitor on and off and you see the windows XP desktop fine then the monitor goes black again aaand the light stays green. You can continue to power on and off with the same results you saee the background then it goes blank. Any idea?

2 Answers

Anonymous

It's hard to identify the capacitors though. Any thoughts on how to do this or where to get them?

Thanks

Rog

Posted on Jan 24, 2008

electronic & computer repair& servicre

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.
ViewSonic Master
12,061 Answers

This is most probably cause by one or more Faulty Electrolytic Capacitors, I find these are the MOST commonest form of "Fault" in these LCD's TFT's units. I ususally simply replace "On Spec" all High Value Electros, in fact ALL Electro's are suspect and often I just "Shotgun" and replace 'em all. Usually fixes all problems. Always use High Temperature Caps. Try this as it is a common problem I find a lot. Good Luck.

Posted on Jul 24, 2007

1 Suggested Answer

6ya staff

2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

Add Your Answer

Upload

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

Hi, My SONY CPD G420 monitor has suddenly stopped working - the front led is blinking amber. After power cycling the LED stays green for a few seconds before going back to blinking amber. I have verified...

just unplug the signal cable and see if it shows a warning! if it shows then the monitor is in some working condition! this problem mainly is not the monitors problem its the systems problem, it seem as if the system is in standby when u on it right??? it happens when the processor doesn't get supply or it refuses to come on! you will see that the red hdd load led will not light when u start the CPU; just open the CPU and unplug the smps from the board and blow the pins to clean them up and re-fix it and see it will work. if still it doesn't work try some other smps it will work! reply and revert back for more help with a vote!

Jul 24, 2010 | Sony CPD G420 19" CRT Monitor

1 Answer

What is happening when computer light (when

cable connection issue between computer and the display? Adjusted the cable? Tried another monitor? Safe mode works? If safe mode works, you can try to update the driver of the graphic card.

Jul 08, 2010 | Dell GX280 Optiplex 2.8GHz Desktop...

1 Answer

I have 12 volts on the PS output to the L19E CCA but I don't have schematics to troubleshoot further. the display is blank the power light is green for approsx 30 sec then turns to solid amber. Any input?...

What is the make and model of this L19E CCA? Green to Amber can mean it does not see the video signal from the PC or it goes into shutdown mode. Pictures will help, [email protected]
http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

Jul 08, 2010 | ViewSonic VX900 19" LCD Monitor

1 Answer

The monitor will not turn on. When power button

First--was it working?
Did it suddenly stop?
When you see the LG logo, then it goes away, does the power light turn from green to amber? Sounds like that doesn't happen.
So--if you are getting a signal, you should see something.
If there is no signal, then the power light should change from green to orange.
With no lights at all, I suspect a faulty monitor.

Feb 22, 2010 | Computers & Internet

1 Answer

Monitor won't turn on

in the output section of smps some condensors are faulty

Dec 12, 2009 | Computers & Internet

1 Answer

Hallo,I have the same problem with my Viewsonic vx900,monitor,green light on if the computer is on, and amber if is off, but i can`t see nothing from the computer,only his display(nenu,etc when I use the...

could be capacitors - just replaced three bad caps in mine and it came back to life!

Oct 07, 2009 | ViewSonic VX900 19" LCD Monitor

1 Answer

Viewsoniv VA 902 LCD 19" monitor

If the signal cable is detachable from the monitor, you could try with another cable... Regarding the power, I' not an expert, but if you're familiar with electronics basics, like risks of high voltage, soldering, etc, and you'd like to experiment with the unit, then I can give you some hints.

Mar 19, 2009 | ViewSonic VX900 19" LCD Monitor

2 Answers

Flashes on then goes black

The green light only lets you know there is a valid video signal reaching the monitor. If the green light was not "on" your problems would possibly be within the pc itself. Something is not holding the circuit for the backlight "on" thus going black. Suggestions are: 1. Take it to get it repaired (if not under warranty) Hyundai carries a 3 yr warranty on this monitor. Website provided. 2. Buy a new monitor http://www.hyundaiq.com/Eng/Customer/CusSvc/Csvc.asp

Aug 27, 2007 | Hyundai L91A 19" LCD Monitor

1 Answer

Monitor Acer Problem

I agree it isn?t the monitor but I would suspect the video card you are connecting it to or the PC itself. Generally if a monitor doesn?t detect a video signal it will go into hibernation mode, typically displaying a no signal warning and changing the LED color from green to amber. When you start the computer is anything displaying at all? Are you sure the PC is powering up and booting?

Jul 22, 2007 | Acer AL1916W 19" LCD Monitor

1 Answer

Monitor doesnt come on , but the power light goes from amber to green. then comes on after 20-30mins maybe.

Maybe update your display drivers. PC appears to be slow.
Make sure you don't have a bunch of apps that auto start.
Do you hibenate your PC?
Same issue if you connect monitor to another PC?
If issue follows you to a different PC it says monitor. If it doesn't it says the first PC (that monitor is currently connected to) had a cpu/memory or a driver issue.

Good luck

Oct 25, 2017 | Sony SDM-HX93 19" LCD Monitor