Question about Sony PlayStation 2 (PS2) Console

1 Answer

Pelican Predator 697 problem...

Please help! I have a number two of a two-set controller package and my controller will not work. It has brand new batteries in (correctly, might I add) and the receiver flashes when plugged into the Playstation 2. However, whenever I press a button, nothing happens. Do I need the number one receiver? I don't know if this helps, but it's a Pelican Predator 697. Thanks for your time!

Posted by Rachel Stasack on

  • jride527 Feb 11, 2008

    lost direction on how to activate mt controller can you help

×

Ad

1 Answer

Adam Tovar

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Pelican Products are unlicensed by Sony and would also void any warranty you had on the PS2. (Me not being a Employee,just what they'd tell you) Have you tried turning off the console taking out the Batteries of the controller,Unplugging the controller from the ports and replugging it back in? Also try a Dual Shock 2 Analog controller (If you have yours still) and see if your ports have gone bad. Usually 3rd party controls could potentially damage your PS2's Controller port as they do not supply the correct power or Data for your system.

Posted on Jul 31, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i use the buttons on the tv to set up my Hisense Roku Tv, the remote control is not working. I changed to batteries, bought brand new batteries worked for a bit stuck at lets get started again


If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
http://electro-medical.blogspot.com/
http://homenol.blogspot.com/
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/
Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.

Jan 29, 2017 | Hisense Televison & Video

1 Answer

My remote, or at least I think it's my remote....has stopped working, even with a new battery. I changed the battery and it still won't work. Can I possibly get a new controller somewhere?? Thanks!


If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/
Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.

Nov 12, 2016 | Televison & Video

1 Answer

Bought a Hisense 42". Plugged in, have blue screen but although cable is correctly connected, shows "no signal". No remote, so I got a OFA brand that is suggested for Hisense. Please help


You should have a remote control to control this TV. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Visit some online sites too, which deals with electronic spare parts.

Aug 23, 2015 | Hisense Televison & Video

1 Answer

I have a vizio s3820 soundbar. The remote will work for a while then it will not, I put in new batteries,still nothing. I unplugged it ,plugged it back in and then it works. Happens every so often


Sounds like the remote control do not get proper contact at its battery terminals. Clean the battery terminals. re-insert the batteries and check. If it do not help you, the remote control is defective, and should be replaced.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability.
Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops.
Type in the brand name of your device, in the search box [at the top right] of the display window and the Search will start at once as you type in, and will show you all the related posts. It will make surf easy.

Feb 24, 2015 | Vizio Televison & Video

1 Answer

I have a pilips 3000 led tv and my remote dont work I change battery's and nothing


Check the remote control for its infrared emission. Check it with fresh batteries. If you wish to get more details about how to check a remote control, please visit this site. Ome among its posts have details about it. Surf the site in "Mosaic" view. It will make surf easier.
http://electronicshelponline.blogspot.com/
If you wish to buy its original remote control, contact the authorized service center, or authorized dealer to your device brand.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its user manual. Never accept a remote control, that hasn't both of this. If you see the site by "MOSAIC" view, will make surf easier.
http://electrohelponline.blogspot.com/

Mar 18, 2014 | Televison & Video

1 Answer

How do I program my new replacement remote control


If you wish to buy its original remote control, contact the authorized service center, or authorized dealer to your device brand.
To select a proper universal remote control, you should know about the number of digits to its set-up codes.There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices.After confirming this, check the sites linked here.Both the sites have set-up code list and set-up procedure to many popular brand remote controls.Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability?Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its user manual.Never accept a remote control, that hasn't both of this. If you see the sites by "MOSAIC" view, will make surf easier.
http://electrohelponline.blogspot.com/

Feb 07, 2014 | Vizio VR5 Remote Control

1 Answer

My battery in my remote were taken out and when this was done I was unable to use the remote to control the cable/T.V. when the batteries were replaced. I set up my remote to turn the T.V. on and off, but...


If the remote control is not broken, the batteries are almost out of power supply. Especially with remote controls that perform multifunction capabilities like with universal controllers. Replace the remote control with new powered batteries. Important notes include being weary of the capacity battery power supply because some brands are incabable of providing supply to remote controllers. For example, unless the remote control requests specific brand battery power supplies, energiser or duracell bateries would power up any device.

Jan 08, 2011 | Televison & Video

2 Answers

Camera says brand new batteries are dead, then shuts down


It is possible that the batteries are dead (they might be faulty or too old) even when they are out of the package, though unlikely. Try another set of batteries, and if these don't work, you'll probably have to send it for a checkup.

Oct 28, 2005 | Fuji FinePix 4700 Zoom Digital Camera

Not finding what you are looking for?
Sony PlayStation 2 (PS2) Console Logo

Related Topics:

219 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Game Consoles & Games Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Sony Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...