At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have had the dvd player for only a few months, and suddenly it will not even power on. I have tried unplugging it and leaving it unplugged for a day and then plugging it back in, and it still won't power on. Any suggestions??
I had a similar problem with Coby dvd 7500 the screen was faint almost black but could hear the movie sound. I cleaned the lens as suggested but it didnt resolve the problem.
I tired to rest the player by removing the power supply cord and the battery for 30 mins as suggested in the manual but that also didnt work. What I did was leave the player without battery and the power cord overnight and it did start working in the morning!!
This worked for me and hope works for you guys too...
Did you have a power surge or anything that could short it out. can you use a multimeter, can you test the unit your self. if so test the voltage through the power board. and through the fuse it might have blown. its all on the board that the plug in goes to when you open the case if its that new dlont do this take it back you will void the warrenty if you tamper with it.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It sounds like you're experiencing an issue with your Advent DVD player not turning off properly. Here are a few things you can try to resolve the issue:
Check the remote control: Make sure the remote control is not accidentally turning on the DVD player. Try removing the batteries from the remote and test the power button on the DVD player again.
Check the power cord: Make sure the power cord is securely plugged into the DVD player and the wall outlet. Also, check that the outlet is working properly by plugging in another device to see if it powers on.
Unplug the DVD player: Try unplugging the DVD player from the wall outlet for a few minutes, then plug it back in and test the power button again.
Try a soft reset: If the above steps don't work, you can try performing a soft reset on the DVD player. To do this, unplug the DVD player from the wall outlet, wait a minute, and then plug it back in. Press and hold the power button on the DVD player for about 10 seconds, then release it. The DVD player should turn off.
Check for a hardware issue: If none of the above solutions work, the issue could be caused by a hardware problem with the DVD player. In this case, you may need to contact the manufacturer or a repair professional to have the DVD player serviced.
It's possible that one of the above solutions will resolve the issue, but if not, it's best to consult the DVD player's manual or contact the manufacturer
My LG 670 also said 'boot' after a upgrade attempt and appeared stuck there. I searched LG support for a factory reset option, which is: Disconnect the LG power cable from the wall / power stripHold down the power button the front of the player for 30 secondsRe-insert the power cordTurn the player back on. Note: my player showed 'boot' again for a few minutes, then shut off. When I turned it on again, it went through the normal power up cycle, then shut itself off (weird). I turned it on again. So far, so good.
Sound like to me you got a problem with the capcitor inside the unit, if its under warrenty it will need to be serviced. If its not I ould be checking capcitors inside to make sure there not bulging leaking or otherwisen ot wroking correctly.
sorry but this is an electronic malfuction or failure , it will need repair
leave it unplugged to prevent further dammage untill you can take it to your local electronic repair shop
I have had this same problem on my Toshiba. I went through the Control Panel and their were settings for the dvd player it used. You can change settings and they sometimes change automatically.
Basic DVD, CDrom Troubleshooting wrong disk ,disk error, First Clean the lens: http://www.ehow.com/how_2036275_clean-lens-dvd.html wont open, wont close, makes clicking/grinding noises etc. http://www.llamma.com/xbox/Repairs/thompson_dvd_tray.htm
This may sound overly simple but try disconnecting the power from the unit (i.e. unplug it from the wall), wait a few minutes and plug it back in, kinda like a hard re-boot.
×