Question about Dell PowerEdge 2950 (becwfk1_6) Server
Hdd light message
Posted by Anonymous on
I finally made contact with our IT dept who were abole to carry out a remote diagnostic test.
Problem has now been identified (problem with tape drive)
Posted on Jun 11, 2009
SOURCE: No video output
Turn off machine un plug all power cables.
To access the jumpers, remove the cooling shroud by lifting the release latch and sliding the shroud towards the front of the system
Lift up the memory module airflow shroud for easy access to the jumpers
This will rest the password and then you will be able to rest the server.
Hope this help you.
Posted on Dec 04, 2009
Smart Start is an HP utility. Dell has a similar one called Systems Build and Update Utility (SBUU) or Systems Management Tools and Documentation (SMTD - much larger download and includes SBUU).
You should use the DVD version if possible, and if you are installing 2003, it should have SP2. If it doesn't, then you can use nLiteOS.com to integrate the Service Pack into your installation media.
Posted on Aug 16, 2010
its the cover switch. there is a small push switch on the front panel that detects if the front cover has been removed, either the switch is defective, or the cover is not seating properly to close the switch.
Posted on Sep 30, 2010
Tips for a great answer:
Dec 10, 2012 | Dell PowerEdge Computers & Internet
Oct 14, 2011 | Dell PowerEdge 2950 (becwfk1_6) Server
Oct 14, 2011 | Dell PowerEdge 1650 Server
Oct 04, 2011 | Dell PowerEdge 2950 (becwfk1_6) Server
Feb 01, 2010 | Dell PowerEdge 2950 (becwfk1_6) Server
Nov 09, 2009 | Dell PowerEdge 2950 (becwfk1_6) Server
Oct 22, 2009 | Dell PowerEdge 2650 OB (2650-6n8p631)...
Sep 28, 2009 | Dell PowerEdge 2950 (becwfk1_6) Server
Sep 11, 2009 | Dell PowerEdge 1650 Server
233 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: