When putting a cd into the slot of the panasonic, a "No disc" is displayed and the cd get ejected straight away.
I also have a JVC with the same problem except it ejects straight away with no, "no disc" display
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Setting the disc ejection lock
You can lock the disc tray to prevent the disc form
When the main unit is turned off, hold down the STOP
key at the front panel for 5 seconds
If you attempt to open the disc tray by pressing
OPEN/CLOSE key, the disc tray does not open and
“LOCKED” appears in the display window.
To cancel the disc ejection lock, hold down the STOP
key at the front panel for 5 seconds again when the
main unit is turned off.
“UNLOCKED” is displayed in the display window.
Before the main unit is turned off, DVD/CD function
should be selected.
There is a "compulsory eject hole" on the left side of the changer. Inserting a screwdriver straight into this hole should eject the magazine unless a disc was partially deployed when power was removed.The last page of the manual shows a picture that details which hole to use.
The manual can be found at: http://resources.jvc.com/Resources/00/00/98/LVT0580-001A.pdf
I just had the same problem with the same model. Disc five was saying no disc and would not play any other discs. I opened the radio and found the the CD tray was missing a piece for disc five. You have to put the disc tray back into the holder to fix it. Make sure it locks in place and you should be able to get the rest to work.
1 Try this: While holding the SELECT button, press the ATT button for 2 secs. It will rest the player and eject the CD
2 To unlock the CDWhile pressing CD, press and hold 0 formore than 2 seconds.“EJECT”appears on the display, and the CD eject from the slot the slot
# If above does not work you have to open the cover and remove CD manually
Do you have any small children in you house?
They love to put quarters, flat washers, etc. into cd drives. This is the major cause of the drive not ejecting in my experience. I have never had a Mac CD not eject a disk. It is very difficult to get foreign objects out of the slot, and I suggest taking it in for repair.
There is a small eject switch inside the drive slot. The idea is to push on it with an "unbent" paperclip. Its located at the left (or bottom) of the slot. You'll have to experiment.
I would pull off cover, unscrew and remove top carriage of tray and remove your disc. While your at it you should take cotton swab and dip it in rubbing alcohol and clean the laser lens. Then reinstall carriage and top cover and try using it again.
Your CD-ROM may still be functional. The tray may just be stuck, instead of broken. First let's remove the CD.
Get a large paperclip and bend the end out straight. Look for a tiny hole underneath the CDS tray. Push the end of the paperclip into it, and it should open the CD tray a little. Then pull it out the rest of the way and get your CD out. Then try pushing the eject button on the CD-ROM to get the tray to go back in. It may take several trys. If that does not work push the tray in, slowly. Then try the eject button again. I hope that works.
If it does not you can continue to use the CD of course (lots of CD-ROMs have paperclips hanging out of them. And I've seen the problem go away, occasionally, after continued opening and pushing back the tray.