Touch screen The touch screen on my phone doesn't work. I can use the arrows to move around my phone but can't use the touch screen with my stylus. I tried a hard reset and the touch screen feature worked for one phone call and now doesn't work again.

thats so the touch pad knows where your finger is, its called calibrating ..just keep touching the arrow until its finished then your touch screen will be set up

you need to calibrate the touch screen, there should be an option on your screen settings

why wont my stylus pen work for my EM714VID

The usual solution for such a problem is to have your phone's digitizer or touch screen replaced. That is the only solution for your phone's touch screen to work again. Have this done by a cell phone specialist, preferably one who's good with samsung phones.

Whenever you do the alignment touch the spot on the screen with the stylus and hold the stylus on the mark until it moves to the next corner.... this may work

I’m happy to help further over the phone at https://www.6ya.com/expert/brandon_156682b88afabb53

DO NOT breathe or move ur thumb/stylus after a few seconds it'll work
took me a while 2 figure out that it knows if u move or breathe

Actually, the red cross's movement is part of the calibration. Continue clicking each individual red cross until you get a confirmation notion notice.

In order to calibrate the touch screen, the DS needs to know where certain areas of the touch screen are relative to the actual display. Basically, you're not really controlling the display. You are interacting with a hidden interface, which is the touch screen. But in order for you to "interact" with what you are seeing, the touch screen is laid across the display.

The touch screen wont register if the unit has been reset and sometimes when it updates. Use the side buttons to control the cursor. Click the menu button, and then use the down arrow key to slect settings.click settings with the ok button. use the down arrow button to scroll down to display. click ok. The display screen will come up. Use the down arrow key to go to touch screen calibration. Use the ok button to select this option and follow the instructions. You will have to use the stylus to tap three calibration points on the touch screen and it should work fine from there.

Turn on your organizer and touch the Clock Icon with your stylus. Just to the right of the bold heading on the top of the screen is a downward arrow. Touch the arrow with your stylus and a screen should come up with with six different modes of your choice. Touch the Home clock. Now touch the Edit on the bottom right hand corner of the screen. Touch the left solid arrow on the bottom of the screen enough times to bring you to the Country at the top of the screen. Touch the solid up or down arrow until you come the USA. Touch the solid right arrow unil you see the USA city field. Now touch the solid down arrow until you come to your city. Touch the solid right arrow once and the hour should be highlighted. Enter your hour. Now touch the right arrow to enter the minutes. Continue with the right arrow to fill in all the values and touch am or pm. Finally touch save or enter. The little smilly face is for daylight saving time which is touched on in the summer time. Hope this helps you, [email protected]

That means your touchscreen is no-good at all. I had the same problem. Had to get a rebuilt 600 from Sprint (thank god for the insurance plan).