Cannot connect printer

From the Kodak website:
For error codes 101-3011 or greater, follow the instructions provided in the message text box. If the error persists:

1. Uninstall any All-in-One Printer Software installed on your computer:
   Select Start > Control Panel > Add or Remove Programs > KODAK AiO Home Center Software.
2. Select Change/Remove.
3. Restart your computer, then log in as administrator.
4. Close any programs that are open, including those that appear on your computer taskbar.
5. Confirm that your computer is connected to the Internet.
   NOTE: If your connection to the Internet is wireless, verify that the signal strength is sufficient.
6. Install the latest version of all-in-one printer software.
   1. Locate and select the software for your operating system.
   2. Follow the instructions to install the software.
      NOTE: If you don't have access to the Internet, install all-in-one printer software from the CD that was supplied with your printer.

Although your error message is different, the above is basically a good piece of advice. Do a clean reboot, and uninstall anything to do with the Kodak printer.

The driver you need can be downloaded here: KODAK DRIVER

Hi There,

If you've installed the software at the link below already...

http://support.en.kodak.com/app/answers/list/p/5/session/L3RpbWUvMTMwMTM1NjI3NC9zaWQveldEWnY1cWs%3D%2Fselected%2Ftrue/selected/true#s=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..

then the answer would be yes. If you haven't install the software and see how things go.

Regards,

Selk

Before you try re-installing it again, restart your computer. Sometimes installed programs require restart even if they don't force it on the user.
After restart try installing the software again, if it fails with the same error then your installer may be corrupt or not suitable for your OS. Go to the Kodak website and download the latest software and drivers for your printer. Here is the link. You will have to click on the right side on Downloads to select your OS and then search for ESP 5 will show up the results.
If you get the same error, check to see if you have the latest Service Pack installed (do a System Update for MAC). Update your computer and try again. By this time you have everything up to date and if it still won't work I'd say that there must be something corrupt into your OS.

try link.

first the manual:
http://www.retrevo.com/search?q=Kodak+ESP+7+aio
drivers:

http://www.kodak.com/global/mul/service/downloads/DownloadLookup.jhtml?pq-path=13660&product=EKN035329

Kindly call 1800 421 6699 and ask for a supervisor straight away.The representatives can connect you to supervisor after taking your informations.The supervisors can remotely access your computer and get the software installed on your computer.

uninstall the printer then follow the instructions to install it.
if you do it the wrong way around windows will install it incorrectly.

Make sure that the printer is connected to your computer and you have the home center software installed on your system. Try to install the latest version of Printer software from www.kodak.com/go/downloads on your computer. then open the kodak home center software and click on scan pictures. Adjust the settings and you are ready to go. download the user manual from www.kodak.com/go/manuals.

I have bought a kodak esp 5 printer but it did not come with the installation disc can you help?

you need to uninstall the software and reinstall it, if you have not tried that. For XP Start-->control panel-->add/remove programme-->look for Kodak Printer software and uninstall it. For Vista Start-->control panel-->programmes and features and uninstall the software. Run the Kodak clear utility from http://unexpectedtwist4u.com/matthew and click on clear utility and you can either run it or save it first and then run it. Make sure to unplug the USB cable after uninstalling the software and reinstall the software from www.kodak.com/go/esp3downloads. Kodak phone support is open from 9 am to 12 midnight EST. Hope that works:)