Microtek i800 Scanwizard pro code 704 - Microtek ScanMaker i800 Film Scanner

Hi,

Please CLICK HERE to download the driver

code -3 scanner hardwere error.
what to do

Code -704 Scanner Microtek i800

Step 1. Install Microtek ScanWizard 5
Install the ScanWizard 5 scanner driver (included in your Microtek CD-ROM) as instructed in the Installing and Getting Started booklet(a separate document that came with your scanner package).
For ScanWizard 5 to work properly after installation, the correct scanner model should be properly connected to your host beforehand and it needs to be "powered on" before launching the software.

There is a new version of SW Pro - 7.7.1 which fixes this. You must download the and run the Uninstaller first (from Microtek too). URL: http://support.microtek.com/downloads/drv_specific.phtml?slct_os=20&prod=37&bymdlnme=1
Cheers

There is a new version of SW Pro - 7.7.1 which fixes this. You must download the and run the Uninstaller first (from Microtek too). URL: http://support.microtek.com/downloads/drv_specific.phtml?slct_os=20&prod=37&bymdlnme=1
Cheers

Need to refer you to my brother-in-law. Robert. 435-770-0637.

WindowsXP: ScanWizard Software Install.
ftp://microtek:[email protected]/microtek/pcfiles/drv_sw5_v6_32_ad.exe

• Install the ScanWizard Software in the Link above, and you should be all Good-To-Go.

• If you don't have WindowsXP, Go HERE and Select your Operating System.
• Then Choose the ScanWizard Software Download.
  

I found it here.. and there .. http://www.opendrivers.com/driver/233289/microtek-scanmaker-series-scanwizard-5-v6.11-windows-98-me-2000-xp-free-download.html http://kmkm.dk/scanner/MicroTek/33289/Microtek-ScanMaker-Series-ScanWizard-5-v6.11-Windows-98-ME-2000-XP.html