Question about ATI Mobility RADEON Graphic Card

1 Answer

SONY PCG-GR315 graphic card

This is a correction of a notebook code i send in a previous message (GR315, not GR15). And i will to add that I have taken apart the graphic video card. Here i repeat what s the problem: LCD screen image appear doubled and shadowed, but on a external screen appear to be normal. Questions are: Graphic card is defective? Do i repair it or (best) replace it? Where can i find a replacement card? Thanks for your help.

Posted by giampietro gigoli on

  • giampietro gigoli May 23, 2007

    Thanks Boggsj, i watch now for a repair center.

×

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 20 Answers

If it appears fine on an external monitor, it seems to me that the problem is most likely in the laptop's LCD panel rather than the video card. I did a google search and turned up exactly zero results regarding the SONY PCG-GR315 Are you sure you got that model number right? In any case, chances are your laptop's video device is not upgradeable. My advice is to go to a repair center or what-have-you and find out if it's the card or the panel; panels can be replaced more often than other integrated hardware.

Posted on May 23, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How do I text with Samsung Gusto 3 flip phone.


Create and Send a Text Message - Samsung Gusto™
  1. From the main screen, press the left soft key to choose Message.
  2. Select New Message then press OK.
  3. Select TXT Message then press OK.
  4. Enter the desired 10-digit mobile number(s) or email address(s) then press OK.
  5. Enter the message.
  6. To add a graphic, animation or sound:
    • Press the right soft key to choose Options.
    • Select Add then press OK.
    • Select a category (Graphic/Animation/Sound) then press OK.
    • Select an item then press OK.
  7. Press OK to choose SEND....
  8. try this.

Nov 22, 2016 | Samsung Cell Phones

1 Answer

Change recite information from previous owner name


Esther:

The exact functionality you are requesting is located on page 52 of the Casio TE-2000 user manual. Pages 48 through 55 are a good read for you as well. You can access the manual at this location:

http://support.casio.com/en/manual/006/TE-2000_EN.pdf

Specifically, you will be changing the store logo and message header information to reflect your current store. The process is rather straight forward, and only requires about 5 to 10 minutes of work on your part.

Specifically, you'll need to decide on a few things first:
  1. Do I want a Graphic Logo?
  2. Do I want a Logo Message?
  3. Do I want top print a message at the bottom of the receipt?
Those three questions will help you program your unit. As the instructions on Page 52 outline, you'll need to insert the PGM (programming) key into the machine, and then do the following:
  1. PGM Key, turn to Program
  2. Press key '3'
  3. Press key 'Sub Total'
  4. Enter: '2122'
  5. Press key 'Sub Total'
From there, you have to enter a special code made up of the first 3 questions:

In your head, start at 0, and then add:

  1. If you wish a Graphic Logo: Add 0 (in your head)
  2. If you wish a Text Logo Message: Add 1 (in your head)
  3. If you wish to print a commercial message, Add 2 (in your head)
  4. If not, just add 0
  5. If you wish to print a bottom message, Add 4 (in your head)
  6. If not, just add 0
Now, take that total (whatever it is), and enter it. So, if you want a Text message AND a commercial message at the top of the receipt, but no bottom message, it would be: 1 + 2 + 0 or 3. You would then enter '0000000' (that's 7 0's). So, that would be '30000000' You then press the 'CA /AMT = /TEND' key. And then 'Sub Total'. From there, you can program your message following the instructions.

I know it can sound confusing, but these are just ways the machine understands what exactly you want it to do. Please refer to the user manual, as it outlines the exact process you need to do. You will also need to refer to the character code table in the user manual (on page 54) just to be able to enter text as it is.

I hope this has helped,

--Phillip

Dec 23, 2013 | Casio TE-2000 PC Desktop

1 Answer

Need instruction manual for GR15 George Foreman indoor grill


Hi there.
You may be able to find owner's manual at http://www.georgeforemancooking.com
Regards.

Jun 04, 2012 | George Foreman GR15 Indoor Grill

1 Answer

I cannot receive multimedia mail. How do I get it to work?


here is a general procedure to understand how MMS works. In this procedure, a photo is being sent to another compatible phone.
  • Step one: Take a photo from your built-in camera phone or download via the Internet.
  • Step two: Personalize the text, graphics, audio or video clips.
  • Step three: Add recipients' number and send.
The recipient on the other side will receive a message alert. Once he opens the message, a picture message will appear on the screen. If there is any text, it will appear below the image. In case, you send MMS to a non-compatible cell phone - the recipient will a SMS with a default line, "You have been sent a picture message!"
There are many challenges that exist with MMS:
  • Adaptation of multimedia content: There may be a difference in the compatibility of multimedia content for different brands of cell phones. If the network operator is supporting your content adaptation - you can enjoy compatibility with more networks and vice versa.
  • Cell phone configuration: Multimedia Messaging Service requires some parameters to be correctly placed in you handset. Sometimes, due to poor configuration, you may not receive messages.
  • Bulk messaging: Sometimes, if you send MMS to a large number of subscribers, there might be some difficulty in sending messages. Now transactional overloads are being optimized.
Moreover, there are several similar terms such as Enhanced Messaging Service (EMS) - very similar to SMS (Short Messaging Service), allowing you to send or receive messages with some special text formatting options such as bold, color, sound effect, icons, etc.

Please rate me!

Nov 26, 2010 | Nokia Classic 2330 Cell Phone

1 Answer

Unable to send texts from Nokia 6300, texts are stuck in outbox I was trying to find the area on the phone to see if the text phone number for 02 provider was correct but could not find it.


Hello dear friend,
You have to Go
>Open Messaging
>MESSAGE SETTINGS(it is in bottom of Messaging menu)
>TEXT MESSAGES
Then go to Message Centres and Check Your Providers Message center Number is Correct and Save it.(If there is No Mesage Centre Number,then u hav to add it by using ADD CENTRE feature}.
>Then go Back to Just previous menu 'Text messages'
>And there wil be "Msg.centre in Use"(open it)
>and select The SIM msg .centre number(if you entered any name instead of sim msg centre /presist any number there,then u hav to select it as containing the message centre number..)

This will clear your problem i think....

Mar 22, 2010 | Nokia 6300 Cellular Phone

1 Answer

Error E 74 is on display


The Graphics Processing Unit is not working. This requires the xbox 360 to be taken apart right to the motherboard. What has happened is the GPU thermal compound needs to be replaced. Best thing is to send it in for repair.

Sep 05, 2009 | Microsoft Xbox 360 Console

2 Answers

I cant download music or use instand messaging on my laptop


When you try to send or download, look at the bottom tool bar. It is blocking because of your virus protection. Just right-click on that bar and click "allow"..


Feb 19, 2009 | Acer Aspire 3690-2196 Notebook

1 Answer

Ati video driver


You're ATI video card has software called VPU recovery. You can shut that off in you're display properties. Suggest you upgrade you're current display drivers. If you are running Windows XP any version, than click on the link below & download the latest driver combo for you're notebook. Creat a folder on you're desktop & save the download into that folder.
After the download is complete, open add/remove programs & uninstall the older driver software. (Do not restart you're notebook)! Install the new driver combo. Than restart you're notebook.
ATI mobility radeon driver link. Choose the correct card.
http://ati.amd.com/support/driver.html

Good Luck!
Mike

May 17, 2008 | ATI Mobility RADEON Graphic Card

1 Answer

Graphic card on sony pcg-gr15


There is no replacement for this as the graphics controller is onboard, as in built into the motherboard and not a seperate dedicated graphics card. You can try updating the driver but i would firstly go to my computer>right click>properties>hardware tab>device manager>click '+' sign on display adapters, select the adapter and right click and select uninstall. Restart pc and the graphics driver will be reinstalled. If no change, then it could be that the lcd or the back lighting is faulty and requires a qualified repairer.

May 21, 2007 | ATI Mobility RADEON Graphic Card

1 Answer

Abit an8 32x post error code 5.2


is it when you are installing vista or on the black screen with white writing you are getting this error? if it was your graphics card you wouldnt get any picture so cant be that mate. and if you can give me the exact message it displays i will try and help you.. All the best John

Mar 02, 2007 | Abit AN8 32X Motherboard

Not finding what you are looking for?
Computers & Internet Logo

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top ATI Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Jax Planet
Jax Planet

Level 2 Expert

923 Answers

Vincent G
Vincent G

Level 3 Expert

2363 Answers

Are you an ATI Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...