I have a surface crack in my panasonic 60 in lcd tv. Model #pt60lc14. Where can I find a replacement?

No, once the screen is cracked it's not worth it to try and fix. It will end up costing more than a newer TV with better technology.

PT-60LCX64 - Panasonic

shop.panasonic.com > Get Support

Panasonic60" Diagonal LCD Projection HDTV. ... Details http://shop.panasonic.com/support-only/PT-60LCX64.html ... Will the Touch Pen (TY-TP10U) work with my TV?

Panasonic TV Not Turning On? (PT-60LCX64)? ' Yahoo Answers

https://answers.yahoo.com/question/index?qid...

Jul 13, 2010 - When I power the TV on, the green light flashes for about a minute, and ... Source(s): panasonic tv turning pt 60lcx64: https://tr.im/EBjDN ... I have apanasonic tv PT-56lCX66 and it wont turn on? Why won't my Panasonic PT-52lcx16TV turn on? Panasonic lcd rear projection 60 inch tv..model #PT-60LCX64.

Panasonic PT60LCX64 Lamp with Housing TY-LA1000

www.amazon.com > ... > Projector Accessories > Lamps

Amazon.com, Inc.
Rating: 3.8 - ‎30 reviews
PANASONIC PT-60LCX64 TV Replacement Lamp with Housing ... Howere, EVER TIME we turn the TV On a Pop Up Message comes up to Set a Lamp Timer!

Panasonic LCD Projection 1 Orange Amber Blink PT 43 50 ...

? 5:48
https://www.youtube.com/watch?v=Z9tLqxpD1qU
Apr 18, 2013 - Uploaded by norcal715

its better if you replace the whole power supply board rather than replace the burnt surface mount parts because commonly if the surface mount parts burnt out there are some shorted parts that cause that burnt and possibly repeat the problem..

Please rate..

Its a LCD AND most likely means a damaged optical light engine which is the most expensive part in the set.

Try holding down VOL - on the TV panel and then hold SPLIT or PIP on the remote for 5 seconds. A message should appear saying it is reset. I hope this helps.

Sorry,not repairable,because the LCD,PLasma,and DLP screen are limited produced.Replacing the tv pannel screen will cost the same as a new tv.Might even cost more after the labors.The tvs screen is about 90% of the tv,that why when is broken or damage,now it only use for it electronics boards parts,or sell for it electronics boards parts that it.

DM power board have burn parts,it dead.Must know how to solders to replaced parts like capacitors puff up or replaced the whole board.Tries these Websites Shopjimmy.com or Ebay.com for refurbush board.

The stand is held on by four screws. Lay the tv face down on a flat surface. Cover the surface with a blanket first. Use a regular phillips screw driver. (If you have a users manual see page 7)
The screws are the set just above the stand on the back of the set. The stand will then slide out.

Unfortunately this indicates that the LCD panel itself is cracked. This can not be repaired, only replaced. Call around to get a cost of the replacement panel. It would not surprise me to find that the replacement panel cost exceeds the cost of an entire replacement TV.

Dan