Channels i have a 25839 sanyo tv and it wont program the channels 48 an on it just skips them and goes to channels 95 and up how can i program this tv to fix this problem and i am also usin a universal remote

Your TV must be set in cable mode for channels higher than 69, and your cable provider must allow those channels to be received without a cable box. Menu, Channels, switch air to cable, run auto scan. If it receiving those channels unencrypted, it will find those channels.

If you cant' get a band of channels it sounds like a bad main board

I have a sanyo dp-19649 tv and it's hooked up to a panasonic sound bar model# sc-htb10,and it's hooked up to a sony blueray dvd player. the sony player works on the sound bar but the tv doesn't.

They have probably been set to SKIP Go to the menu

and reset channels

will probably have to have the remote or a universal will work.....cable tv remotes can be programed to work with most any tv. occasionally you can hold certain button configurations on the tv it's self to bring up the menu then do an auto search

Out an antenna and do an auto program

Go to the Menu setting, and do a auto channel scan, it will automatically program it to NOT skip 3.

I think, Your TV menu item to auto-program has been locked. read its user manaul to unlock it. Many companies gives such lock facility in tv to avoid miss use.

There is a button under the bottom edge of the screen (with the controls) that has the options "Normal" and "CATV" - press this and it should solve your problem.

Tracey

Are you using cable to get the picture? If you are, make sure the TV set is in the cable mode,If it is then you most likely have a bad tuner in your set. Good Luck