Question about Samsung HCN5527W 55" Rear Projection Television

1 Answer

Faded colors I have noticed that the colors are faded, it looks like everything has gone through the was about 100 times. Also, on dark scenes it has a green hue to it. It tried the picture perfect and it gets to @ 20% then stops. I also, tried the manual convergence...but, no luck there either. Any suggestions would be great.

Posted by Mike Byron on

  • NANA CAROL Nov 19, 2007

    WE HAVE A 55 INCH, AND THE COLOR WAS BAD, COULD NOT ADJUST IT. SEARS CAME OUT AND THE SERVICE CALL WAS 100.00 AND HE CHECKED ALOT FOR ALOT OF OTHER THINGS. WE HAD NO BLUE COLOR. SO THE PART WILL BE 281.39 AND 145,00 TO INSTALL IT. IT"S ONLY 3 YEARS OLD AND THE WARRANTY RAN OUT LAST YEAR WHICH WAS TAKEN OUT FOR TWO YEARS. WE PAID 1,799,00 WE ARE GETTING IT FIXED, BUT AM TRUELY DISSAPOINTED. SO WHAT DOES EVERYONE THINK?

×

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 150 Answers

If the picture is dark or messed up too bad, the magic focus will not function, are all the primary colors faded? RED GREEN BLUE? You might have a bad CRT, would call a service man to check out.

Posted on Jul 07, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Does an old PHD cause faded colors?

the PHD transfers the image to the printed page and when it starts to go bad the images can become dull or faded and even blurry or totally missing. Id recommend the PHD be replaced and it should resolve your issues.
0helpful
1answer

FG100 mp3 player display faded (so weak colors) are

I have the same problem with my fg100. After 5 years of usage oled became very dark. Moreover my friend experienced such a problem with his fd100 in the same time interval after buying (~5 years). It seems it is regular problem with this device after several years usage. If you know how to solve the problem pls e-mail me: [email protected]
11helpful
3answers

Samsung CLX-2160, keep getting faded toner stripe down page. changed toner numerousof times The same problem occurred for me after only 300 pages. The black color on the all prints is faded out on the...

Everyone will tell you that it's the Imaging Unit - happy to say that's not true. If it was the imaging unit the colors would not come out right either. I bet if you print a test page that all the colors come out fine across the page. It's only the black.

Also - if you replace the black toner cartridge, or reinstall your printer and drivers like some people will tell you - still no results.

The problem is in the black toner cartridge PATH inside the printer. Something has jammed it up a bit. Try taking out the black cartridge and blowing firmly into the small hole at the bottom of the spout that looks to have a sponge inside. Use a straw and make sure your air blown is dry. Then lightly tap the cartridge a few times. Then use the straw and once again blow very firmly inside the receiving path (inside the printer) for the spout on the cartridge. Make sure you are blowing into the spout path at the bottom - not the gear drive path in the middle - as that will not do any good.

Replace the cartridge, warm up and print another black and white page. You should see that the faded out section is gone or diminished in size. If it is not gone, simply repeat the above steps until it is gone. You will see that the faded out strip gets smaller and smaller each time until it's gone. I had to repeat five times, but eventually got it corrected. Now prints like brand new so don't get discouraged.

Loki
0helpful
1answer

Picture has a red "haze"

the color in my tv is a little faded when theres dark scenes on cant really see picture. Red and Blue really fade into picture
0helpful
1answer

Samsung color fading-light on lft side to dark on rt side

i want to download the driver softwere of samsung clp-300 series vista ultimate supported
0helpful
1answer

Light or Faded Areas in Solid Color Prints

If the issue is occuring in the same place on all prints, try the imaging drum (can't remember if this printer even uses one) or the transfer belt/roller (not sure which it uses). If you phone Dell support, they should run you through troubleshooting and send you either of those parts free of charge if you are under warranty. If not, buy them anyways; they don't degrade over time (if kept in the dark) and can be saved for when the currently installed one runs out if you don't need it to fix this issue.
0helpful
1answer
0helpful
1answer

Windows Looks Faded

normally, this indicates that the color settings in Display properties are set to a lower than normal setting

It should be 32 bit true color
Not finding what you are looking for?
Samsung HCN5527W 55" Rear Projection Television Logo

Related Topics:

167 views

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76698 Answers

Ekse

Level 3 Expert

13435 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

513 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...