- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
i lost the book to vibe remote ...i just went and bought another remote returned remote kept book..here it goes....hold down device tv cd vcr button till light goes on while holding dont let go wait till light goes out then hold down power button while still holding both buttond now wait for light to go out then let go of both buttons then point remote at device and push power button untill device turns off then push stop button to set and there you go all set....note you may need to push power button a bunch of times to find code so hang in there...if in doubt start over
ok i have a vz401 and it was locked out so what worked for me is.
hold the volume down button then push the power button after you are holding down the volume button.then if you dont know the code put in 4356 it worked for me
IMPORTANT NOTE: You must have the security anti-theft code for your VW radio from the car manufacturer, or from a VW dealer! You can find the radio code at: http://www.radio-code.co.uk/
The sequence of VW radio programming is: 1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed. 2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt. For example: we have the security code "5079". Then: 3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted. 4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted. 5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted. 6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted. 7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!
How To Reset Waste Ink Canon Pixma MP450 Hi there You can try to reset the cartages this may do it Please call back let us know if it worked for you, PLEASE.
Power off printer Hold down STOP/RESET button then Press and Hold down Power button Keep Power button down and Release STOP/RESET button Release power button Push STOP/RESET button twice Wait 20-30 seconds - our LED showed Idle Push STOP/RESET button four times Push Power button twice Power off Next time the printer is started the waste count will have been reset.
But when you get time dont forget to clean out the waste ink pads or you will have a ink mess in time to come.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
I had the same problem yesterday and found that the switch under that area appears to be a rocker switch instead of just a push button.
So...towards the bottom of the button locks it and pushing it in the top of the button area unlocks it. Or at least it did on my fridg. Good Luck!
i think you must try master clear first..if it does not work have it reprogrammed..save the data you don't want to lose first..anything saved on your memory card won't be erased..just those ones saved on phone memory will be erased so try master clear