Question about Palm Zire 71 Handheld

Open Question

I replaced the Battery in my palm Zire 71 and two pieces that fell out and then when i put it back together with out them the camera wont come on at all I have the pieces but I just need to find out w

Well I replaced the battery in my palm and two peaces fell out and well i didn't see where they came from but i am pretty sure that they where for the camera do to the fact ever since then it works fine it links to the PC and every thing but the camera doesn't come on any more and all that i need is a pic or info on where they are supposed to go so any help that can be provided will be welcomed

Posted by dabrainco09 on

Ad

1 Related Answer

Anonymous

  • 164 Answers

SOURCE: palm zire 71 replaced battery camera and charging port not wrking

Dis you see if either the brown plastic locking part of the connector is broken or missing?

Do you know if the soldering joints and terminals of such connector are in good shape?

I am asking because it may be only that the flat ribbon cable is nort placed properly, or such flat ribbon cable is damaged.

Also, the connector at the mainboard can be damaged.

Depending of what is damaged, it will be the cost to repair it.

I do recoomend you to disassembly very carefully your pda again, and check such areas and parts.

If you find something that is broken, you can get the needed parts from a broken PDA in Ebay or similar sites.

Best regards,

Posted on Jul 25, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I need to replace my battery in my zire 71 but cant find how to open it up.

Hello there,

If your palm zire 71 is still under warranty, I would suggest to bring it to the authorized service center for assistance as opening your Palm may revoke the warranty. But if it is already out of warranty, below is the link that could guide you and which includes illustration on how to do it correctly.

http://www.pdainternalbattery.com/zire71install.html

Hope this helps. Goodluck!
0helpful
1answer

The information on my Palm Zire 71 all appears to have been lost.

looks like it's completely gone, hope you kept backups.

was the data stored on the SD-Card, if so try putting the sd-card in a computer/card reader.
0helpful
1answer

Zire 71 Camera

1) The camera is most likely broken- unless you are handy dont bother trying to use the camera

2) The booklet isn't all that useful but you can find a copy of it on Palm's website as a PDF file

3) It will turn off and a prompt will warn you of the low battery, but if you continue to turn it on it will "forget" everything in memory

I hope this helps and I hope you enjoy your Zire - it is a good PDA
0helpful
1answer

Palm zire 71 replaced battery camera and charging port not wrking

Dis you see if either the brown plastic locking part of the connector is broken or missing?

Do you know if the soldering joints and terminals of such connector are in good shape?

I am asking because it may be only that the flat ribbon cable is nort placed properly, or such flat ribbon cable is damaged.

Also, the connector at the mainboard can be damaged.

Depending of what is damaged, it will be the cost to repair it.

I do recoomend you to disassembly very carefully your pda again, and check such areas and parts.

If you find something that is broken, you can get the needed parts from a broken PDA in Ebay or similar sites.

Best regards,
0helpful
1answer

Palm Zire 71

The top plastic digitizer is defective.

It needs to be replaced.

There are several sources on-line to buy such digitizer part.

Best regards,

0helpful
3answers
0helpful
1answer

Zire 71 powers up in cradle but turns off out of cradle

Ebay is your best place for batteries http://search.ebay.com/search/search.dll?sofocus=bs&sbrftog=1&catref=C6&maxrecordsreturned=300&frpp=50&from=R10&satitle=zire+71+battery&sacat=-1%26catref%3DC6&sargn=-1%26saslc%3D2&sadis=200&fpos=94087&sabfmts=1&saobfmts=insif&ftrt=1&ftrv=1&saprclo=&saprchi=&fsop=1&fsoo=1
0helpful
2answers

Palm Zire 71 Display Problem

If you slide your Zire up as if you are using the camera, there is a reset hole in the back that you can poke a needle or pin into to have it do a "reboot" which will not lose data.

Not sure why the display changed.
0helpful
1answer

Why doen't my Palm Zire 71 have hardset area

Check out the picture at the following link: http://www.palm.com/us/images/support/kb/articles/hs/30113_Zire71.gif
Not finding what you are looking for?
Palm Zire 71 Handheld Logo

Related Topics:

126 views

Ask a Question

Usually answered in minutes!

Top Palm Computers & Internet Experts

Mandeep  Singh
Mandeep Singh

Level 3 Expert

1184 Answers

Brad Brown

Level 3 Expert

18693 Answers

NOEL
NOEL

Level 3 Expert

8555 Answers

Are you a Palm Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...