Black Screen Camera turns on...but black screen, cant take ant pictures...

Your camera may be manifesting shutter not opening problem. It needs to get to a camera service/repair shop.

However, it's good you physically check whether the lens isn't blocked or covered with anything

Hello Kitomari4

OK, the fact that you only notice the the lines and spots on the lcd itself, means that the lcd itself is damaged. This is most likely due to an internal crack on the lcd. I would suggest you get the screen replaced at your nearest camera repair centre.

Please feel free to let me know if you need ant further assistance.

Kind regards
Lock123

Sounds like you accidentally pressed the DISP or DISPLAY button on the back of your camera. This manually turns the screen on or off to save batteries. You would then use the optical viewfinder, just like you've been doing. To turn the screen back on, press the button once more.

check eye settting or its a fungus inside lens black screen is due to virus

screen belt is cut off. send to us

The LCD screen is black and I can't tace picture. But I can still view my pics. The camera goes thru all the motions like it is taking a picture but it is just coming up black.

You may still be able to take pictures with your black screened Kodak camera. This problem occurs in the line of Kodak EasyShare digital camera models.

When you turn on your Kodak EasyShare digital camera, turn off the LiveView function. Take a picture using the small-windowed viewfinder (this is not the LCD screen). Also, try zooming in and out.

After taking a picture, review the picture to see if the picture has been taken. Then turn on LiveView and occasionally the LCD screen should no longer be showing a black screen.

hi.. I also had this problem with canon ixus 75. i took it to the service center and they just knocked its lens(lightly) when it was on ON mode, then suddenly the screen started working.
But he said that u should use it on regular basis for few days and if the problem occurs again. then we will have to change the sensor, I think he said sensor or something like that.

CCD sensor faulty especially if you can play back pictures that were captured properly, but have a blank screen in capture mode. Replace sensor and camera will work fine.

camera ccd is / has failed - also possible , lens iris is stuck closed ( on monitor , can see very faint snow noise against black background - check if iris opens , by shining penlight into lens );