Question about Office Equipment & Supplies
AR 5618 F2-64 ERROR CODE PROBLEM PLEASE SOLVE
Posted by Anonymous on
Sharp ar-5618 in f2 to 2f error
Posted on Jun 11, 2013
My machine model AR5618s
error code 2 and F than 64
Posted on Jul 30, 2013
Replace toner cartridge, and then if necessary, replace developing unit.
Additional cleaning steps described at the internet link above, and other possible parts to be replace if necessary..
Posted on Dec 17, 2018
SOURCE: Sharp ar-163 model Error code F1
You can hold down the start key when the F1 is displayed it will show a sub code. The service manual for that model shows only one F1 code which is an F1-06. That is a shifter motor trouble. That is the section after the exit that offsets the copies.
You can reset the code with the instructions below. If the error recurrs then chech the exit section shidter for proper movement. You may require an on site technician to remedy this issue.
To reset the error code:
Hit <clear> <interrupt> <0> <interrupt>
Posted on Jan 06, 2008
SOURCE: H2 error
An H2 is an indicator that the temperature sensing device is reading open, preventing the machine to warm up. There is only one way to correct this and that is to replace the thermistor, and that takes a technician. Not a hard job but a novice could get into trouble and make matters worse. Aloha, Bill Monroe
Posted on Sep 06, 2007
SOURCE: sharp AR-R550n
Hello sir; You may try to perform a reset procedure as follow;
press " program", " * ", " clear ", " * " and start key, then enter 17, press start again, turn machine off and back on.
Posted on Aug 23, 2009
Tips for a great answer:
Aug 09, 2017 | Sharp Office Equipment & Supplies
Jan 09, 2017 | Sharp Office Equipment & Supplies
Oct 13, 2016 | Sharp Office Equipment & Supplies
Sep 27, 2015 | Sharp Office Equipment & Supplies
May 16, 2015 | Sharp Office Equipment & Supplies
Sep 06, 2013 | Sharp AR-M277 Digital Copier Copier
Jul 31, 2012 | Sharp Office Equipment & Supplies
Jul 26, 2012 | Office Equipment & Supplies
7,192 people viewed this question
Usually answered in minutes!