Question about Kenmore 30464 / 30465 / 30469 Gas Single Oven

1 Answer

Kenmore Gas oven is giving F8 error code

I have a Kenmore single 24" gas buit-in wall oven. While I was using the oven the other night, I lost power to my home. When the power came back on, the oven showed error code F8 and would not clear or reset. I have removed the ERC (electronic range control) to try to reset but this did not work. I turned the breaker off at the box and this did not reset the oven either. From what I have seen about the F8 error code I need to replace the ERC, but I don't see how the control would have gone bad just by loss of power. I hate to spend the money on a new one if there is another solution I am not aware of. Please help. Thanks for any advice.

Posted by Doug Davies on

Ad

1 Answer

Charlie Popeck

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 68 Answers

Unfortunately the F8 usually means an EEPROM data shift error. Try turning the power on and off several times. If error continues, you have no choice but to replace the ERC. Check on line for the best price. There is a group in the Chicago area that repairs ERCs. Check them out at www.cgiltd.com The failure of the your power system may have been associated with a surge either as the power went off or when it came back on. It may have been the surge that did the damage.

Posted on May 19, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

KENMORE GAS STOVE OVEN , how to check if power is coming to the ignitor


The oven burner igniter
commonly known as the hot surface igniter is used in modern gas oven burners to open the gas valve and to ignite the gas. As the igniter draws electric current it will heat to a high temperature and glow, as well as cause the bi-metal in the oven safety valve to warp and open the valve releasing the gas to be ignited. This sequence normally takes about a minute. Igniters come in both flat and round styles and are very fragile. If the burner does not light then you should check the igniter first. If the igniter does not glow at all, then check for power to the circuit. This is a live voltage check and should be performed by a qualified person. If power is present then the igniter may be open circuit and can be checked for continuity with a multi-meter. If the igniter is glowing, but the burner is not lighting, the igniter may be weak and still be at fault because it requires a certain amount of current draw to open the valve. This check requires the use of an amp meter and should be performed by a qualified person. If the igniter is defective then it must be replaced.

Sep 07, 2014 | Kenmore 24 in. Gas Self-Clean Single Wall...

1 Answer

Maytag 24 " wall oven gas trouble code F5


Hi ngwhite,

The trouble code F5 is a Watchdog and hardware conflict. You need to replace the clock (ERC).

Hope it helps.

Thank you for using FixYa.

Aug 02, 2010 | Maytag 24" Built-In Single Gas Wall Oven -...

1 Answer

Kenmore 790.75738892 won't heat up enough or fast enough what can I do to fix the problem?


most likely justneed a temp sensor. there is a rod that comes through back of oven. you will find it inside oven on back wall.

Aug 01, 2010 | Kenmore 30464 / 30465 / 30469 Gas Single...

1 Answer

I bought a used 24 inch GE gas wall oven, changed it over from natural gas to lp and it will not ignite they glow red but no flame


Many times, unless you have the universal, the orficies have to be changed. From nat to LP. they do make a universal type.

Dec 15, 2009 | GE 24" Built-In Single Gas Wall Oven

1 Answer

MY 24 INCH BUILT IN SINGLE WALL OVEN DIGITAL TIMER


turn power off at main box the back on retry st set clock . if it won;t set / replace it . it has gone bad .mm

Dec 09, 2009 | Maytag 24" Built-In Single Electric Wall...

1 Answer

F-3 Error code Maytag Wall Oven....


Shorted or open oven temperature sensor (RTD)

Check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor (RTD) if wiring is ok.

Jun 24, 2009 | Maytag 24" Built-In Single Gas Wall Oven -...

1 Answer

F7 code on maytag cwb3100aab 24" wall oven.


Hi, The Function key is shorted or stuck.

Replace touch pad or if touch pad is part of the clock, replace the clock (ERC).

Apr 11, 2009 | Maytag 24" Built-In Single Gas Wall Oven -...

1 Answer

Older Kenmore oven- door locked by itself


wanna say you have a faulty latch/self clean assy. however the erc( lcdd panel could also send eratic power supply to latch mechanism)

Mar 09, 2008 | Kenmore 40494 / 40495 / 40499 Electric...

2 Answers

Kenmore 911.30464, 30465, 30469.....Wont ignite at all


there is a second ignitor for the oven unlatch bottom panel remove heat panel there is your burner and ignitor

Jan 15, 2008 | Kenmore 30464 / 30465 / 30469 Gas Single...

Not finding what you are looking for?
Kenmore 30464 / 30465 / 30469 Gas Single Oven Logo

885 views

Ask a Question

Usually answered in minutes!

Top Kenmore Ovens Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Dan Webster
Dan Webster

Level 3 Expert

8221 Answers

Brad Brown

Level 3 Expert

18664 Answers

Are you a Kenmore Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...