Picture is tilted and bottom of picture is cut off

you may have tap the saw to move tilt.
The cuttinghead of your compound miter saw can be
tilted to cut any bevel angle from a 90 degree straight
cut off to a 45 degree left bevel angle. Loosen bevel lock
handle (A) Fig. 19, tilt cutting arm (B) to the desired
angle, and tighten lock handle (A)
Delta MS250 Instruction Manual Adjusting Pointer Locking Cuttinghead In...

A compound miter saw has a rotating vertical pivot allowing the cutter head & blade to be tilted (or beveled) sideways in addition to the horizontally rotating table. This allows vertical & horizontal angled cuts as well as cuts angled in both planes.

I too had the same problem but i have solved it. When i was scrolling all the channels, a hidden menu appeared. In that hidden menu all the tv functions are present. By changing the values we can adjust the resolution.

Fiend your solution direct from nintendo. Here is your solution....
http://www.nintendo.com/wiiconsole/prob676ijt65/solution


jeonatumi11

Here is link to know the procedure how to go in to service mode in Sony TV.
Need further help, let me know.

You would need the service manual for that adjustment. It is outlined in the service manual on how to adjust the tilt. It is a mechanical adjustment. You can get the service manual emailed to you instantly after purchase at this link.
http://servicemanuals.vstore.ca/

can u elaborate
i cant understand cuts off...

sounds like the lcd screen has come unglued from the tilt window.

First, have you made any adjustments to the tv other than from the setup menu? If not I have the service manuals for the tv in pdf files and would be glad to send them to you. Let me know I have the same tv and corrected the same problem. v/r, Scott

sounds like a sustained board not really sure a picture would help is it just on one side?