After inserting memory card the mustek dv2000 does not work
After I insert a memory card into the mustek dv2000, the camcorder does not respond to any pressure on one of the buttons on the keyboard. Even the off-on button des not work anymore, and the set-button does not work as well.
As soon as NO memory card is in the slot, the camcorder respond wen i press the on-of button, but it say: No card.
Must I reset this thing? And how do I reset this camara?
It does not work at all anymore..
H E L P !!!!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
remove the memory card from your Sony Handycam and than insert in to your computer, connect the camcorder, go into your computer and click on the camcorder, than click which video or picture you want and send it to your memory card and than insert it back into your camcorder, because I don't think it has transfering cababilities within, hope this helps
For Genius G-Shot HD55 you need to insert the SDHC card deeper into the slot until it clicks closed, like opening a pen, then when you want to remove it press it again until it clicks to release, like closing a pen. Your card is recognised after the deep click insertion and restarting the camera.
This is a feature and not a defect of the CX-12 that reminds the user that the memory stick inserted might not be able to record the data from the camera effectively. HD video requires a memory stick with a relatively fast data read/write speed, and the CX-12 recommends not using any other stick that is not Mark 2.
Fortunately, though, as you have found out, it does not affect the camera's ability to record in non-Mark 2 sticks.
Hope this helps!
Did u insert them in the right position?
Check if there is any little card icon for the way to insert.
Also try push it in until you hear a click (that should be about 1-2 mm deeper then the slot surface level.)