Remeha plus timer - Hardware & Accessories

If your Aqua Plus timer is successfully turning on the filter but is not turning it off automatically, there could be a few potential causes for this issue:

1. Timer Programming: Double-check the programming of the Aqua Plus timer to ensure that the off time for the filter is correctly set. Verify that the timer is configured to turn off the filter at the desired time. Review the user manual for the Aqua Plus timer or consult the manufacturer's website for detailed instructions on how to properly program the timer.
2. Timer Power Supply: Check the power supply to the Aqua Plus timer. Ensure that it is receiving a consistent and uninterrupted power source. Any power disruptions or fluctuations can affect the timer's functionality. Confirm that the timer is properly connected to the power source and that there are no loose or damaged connections.
3. Defective Timer: It's possible that the Aqua Plus timer itself is faulty. If all the programming and connections seem correct, but the timer still fails to turn off the filter, it may require replacement. Consider contacting the manufacturer's customer support or consulting a pool professional for further assistance or potential warranty coverage.
4. Manual Override Switch: Some timers have a manual override switch or button that allows you to manually turn the filter on or off regardless of the timer settings. Ensure that this switch is not inadvertently set to the "On" position, as it would override the timer's control.

If you have exhausted these troubleshooting steps and the issue persists, it is recommended to reach out to the manufacturer's customer support or consult a professional pool technician. They can provide further guidance and assistance in diagnosing and resolving the issue with your Aqua Plus timer.

Check the water section for blockage

change your heat sensor

The sensor is failing when heated

http://waterheatertimer.org/How-to-set-timers.html

Gene

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

http://waterheatertimer.org/How-to-set-timers.html
There are two different timer modules... analog and digital... open link to help identify timer and instructions
Gene

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Call a engineer

1) Copy following link to help identify timer, and download possible manual:
http://waterheatertimer.org/Woods-timers-and-manuals.html#Remeha



2) Add comment and include phot of timer, and/or clear description of timer

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Product manual shows how to set ECO pro:
http://www.vaillant.co.uk/stepone2/data/downloads/2f/44/00/ecoTEC%20pro%20operate.pdf

The unit can also be wired to separate timer.
This timer might be one of following timers shown on link below, with possible manual for each.
http://waterheatertimer.org/Woods-timers-and-manuals.html#Remeha

Live answer 11-24-12.
Add a comment and describe timer buttons and detail, and post photo on flick and send link to photo for clear identification of product.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Hello
Try these links.
help.tradingdepot.co.uk/heating/remeha/avanta-18v-user-guide.pdf
uk.remeha.com/fileadmin/user.../Remeha_iSense_Leaflet.pdf
http://www.dataentryjobs.us/67948.html