My exterior screen of my RAZR lights up, but shows nothing
I don't really know what happened. I was using it one minute and the next minute the screen didn't work. I can't see the time or my incoming calls. I didn't drop it or anything. I really hope someone can help!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
black screen blur image showingcannot see subject to be photographed when camera power on,if press to take photo nothing shows, just black screen. it was fine one minute then nothing the next. battery is fully charged, memory card ok.
the connection between the phone and the adapter are copper and the get corroded take a small pin and scratch away the green corrossion and that should solve your problem. the cause is condensation. good luck
i think you must try master clear first..if it does not work have it reprogrammed..save the data you don't want to lose first..anything saved on your memory card won't be erased..just those ones saved on phone memory will be erased so try master clear
Hi, before sending it in or taking it to a
Motorola repair station, try this. Open phone turn it over so camera is facing you with finger behind and thumb of your right hand sweeze the area between camera lens and the vol up down button to reseat the ribbon connector that is located in that area between the cases. This worked for me and it is worth trying.
With the phone off, hold * and # keys and then press power button:
- If your phone screen still dont show anything then the backlight or whole screen is broken and you would need to replace or make a technician to replace the screen. - If your phone shows a boot screen with serial numbers on it, then you would need to re-flash or reload the phone firmware to recover your phone. For that you may need some special software, a PC and your phone's USB cable. You can find tutorials and guides over the web.
To get out the bootloader screen you need to take out the battery and the re-flash procedure delete all your data so I recomend you to download it with your phones PC software.