What do I need to transfer video from jvc cam to my laptop

If it comes with micro tape then you need to provide a USB audio-video adapter. Connect and play it. Or if it comes with memory card then you need a card reader.

Use different software.

You badly need CD, visit your nearest JVC Center, you can ask a copy of it, you might need the application software as well, it comes all together too large to send via email. Important Note, Connect first your cam and pc before installing the driver. Hope it helps

to transfer video from your camcorder to your laptop you will need a firewire cable (ieee 1394). only with this cable you will be able to transer video.
you will also need a firewire port on your laptop.
if you don't have one then you can buy a firewire pci card.

see this for info and pictures
http://en.wikipedia.org/wiki/IEEE_1394_interface

Hi, connect the cam and PC using 4 pin firewire cable (not USB cable).
Switch on the cam.
Open Windows Movie Maker and import the video from device.

u dosn't install the software properly .again start installing the software in your laptop carefully then it may solve your problem .

always check for new firmware and download it and load it to your cam. may sure also tthat the file type can ber supported @ your cam.

You can't capture the video with a USB cable. The USB cable and software that came with the camcorder are only used to transfer still images.

To transfer video you'll need a DV cable (also known as a Firewire cable) and some additional software. I use Scenalyzer Live. It's not free, but you can download a demo copy to see if you like it before you buy it. Here's a link to the Scenalyzer website:

http://scenalyzer.com/

If you have the JVC manual you should read page 41. If you don't have the manual you can download it here:

http://www.devicemanuals.com/guide/Digital%20Camcorder/JVC/JVC-Compact-VHS-w-LCD-Screen-Camcorder-GR-D370AS-User's-TWpJME56VT.html

The download link is about half way down the left side. It's a little difficult to find, but it's there.

Lastly, all this assumes that your computer has a Firewirre port. Most new computers will have one, but if you do not you'll need to buy and install a Firewire PCI card. Let us know if you need more help.

While capturing the video you have to change the Video mode to PAL or NTFS mode & store the Video's in Memory card,

When you want to transper the video's, remove the card or directly plug in to the camera to Computer USB port

Now you can transper the Movie's easily..

Try it out.

good luck..

I am trying to find out how I can transfer the video footage from my camcorder tapes onto my laptop to then store as DVD's. Is it possible? how can free down load driver frmo website is it also posible?