Smeg Dishwasher Hi, My smeg dishwasher keeps blowing the RCB (Fuse), it runs for a couple of mins and then its happens, please can anybody help.

Anonymous Mar 22, 2014

It keeps going to error 1 even though I tilted it to let the water out

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.
Expert
247 Answers

This is usually the heating element - corrosion lets small amounts of water through the element jacket, making the mineral insulation inside slightly damp. When the machine applies power to the element, enough current leaks from live to earth to trip the RCD. In the absence of a proper electrician's insulation tester (a DVM in ohms mode doesn't test at a high enough voltage to give a meaningful result) the best way to prove this fault is to (carefully, and with the power off!) disconnect and tie back the wires that go to the element, then run the machine and see if it gets any further in the cycle. A.

Posted on May 17, 2007

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

E9 fault on smeg dishwasher

Cleaning the tray and float resolved the E9 error on my Smeg dishwasher. Thanks!!

Read full answer

Mar 04, 2012 • Smeg DWI614 Built-in Dishwasher

0helpful

1answer

Smeg DWD1SSE-1. Start the dishwasher. Runs for a short period, normally between about 5 - 10 mins. The just stops. No error message. Just as if it has reset itself. Power supply good. Doesn't always...

Hi my Smeg dishwasher is doing the same! Did you have any luck fixing it?

Read full answer

Jun 20, 2011 • Smeg 24 in. DWD1SSE-1 Built-in Dishwasher

0helpful

1answer

Smeg dishwasher E1 error code, not filling up

Hi!

here are manuals to the number of SMEG dishwashers.

Hope you could find there your device and the "troubleshooting" part of it would help you!
https://manualsbrain.com/en/brands/smeg/dishwashers

Read full answer

Dec 07, 2017 • Smeg Dishwashers

2helpful

1answer

SMEG dishwasher - cycle buttons

What is the model of the dishwasher? Open the door and look down the right hand side for a sticker and repost please. As a rule number 3 is a normal wash :D

Read full answer

Mar 23, 2009 • Smeg 18 in. DWI410 Built-in Dishwasher

3helpful

2answers

Dishwasher manual

Hi Rosemarygard,

You filed this question under Smeg DWF614SS. You can get the manual for that model here- http://www.smegtech.com/site/smeg/pdf_libretti/19590081906-GB.pdf.

Searching for model M4608AL isn't leading me anywhere, so hopefully it's some sort of subcategory of the DWF61466. If you realize that your Smeg is another model, go to this page and type your model into the field on the left- http://www.smegtech.com/site/smeg/myapp/libretti/index.php?lang=EN.

I hope this helps.

Read full answer

Jan 25, 2009 • Smeg 24 in. DWF614SS Stainless Steel...

0helpful

1answer