Question about HEWLETT-PACKARD Office Equipment & Supplies

1 Answer

Hp cp1525 has trouble picking up heavier paper from tray

I print on a thicker, stiffer paper for certain tasks. Originally the CP1525 was able to pick up this paper without problems, but after a year or so is having lots of 'paper jams' where it starts to pick up the paper from the main tray but then gets stuck. I suspect that the pickup roller and associated hardware needs cleaning/replacement.

Posted by Anonymous on

Ad

1 Answer

Dominion Computer Solutions, Inc.

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

  • HEWLETT-PACKARD Expert
  • 312 Answers

No doubt the feed rollers are worn.

Posted on Sep 22, 2017

Ad

5 Related Answers

Anonymous

SOURCE: Kyocera FS-1920 won't pick up paper from tray

replace pick up rollers and paper tray roller. Take out paper tray and toner, lift printer so you can see underneath you should see a set of rollers its nopt to hard to get out. also in the paper tray there is a roller swop that out to

Posted on Sep 03, 2007

Ad
Soulvisitor

Soulvisitor

  • 1113 Answers

SOURCE: Doesn't Print - Says "Paper Jam"

That is the problem, machine will show printer jam if paper feed rollers fail to pick up paper when requested, your machine sounds like it needs new paper feed roller or you can clean the paper feed roller with a slightly! damp cloth.

If no jam light shows when power is turn on and machine comes to ready and then you send a job to printer and it then shows jam then it is the feed roller or sometimes the feed clutch

If on the other hand it always show jam then there is or a switch is stuck.

Posted on Oct 26, 2007

Anonymous

  • 2 Answers

SOURCE: hp laserjet 8100 8150 13.1.42

hp printers typically do not have an error message to cover every known condition, thus if the printer needs maintenance in an undefined area, it will invariably indicate a paper jam. The printer usually responds to the installation of a maintenance kit which will include transfer roller, pickup rollers, and fuser.

Posted on Oct 03, 2008

Anonymous

  • 1 Answer

SOURCE: Xerox 6250 - Jam at Registration Roller

Ik heb een deregelijk probleem gehad, ook bij merdere printers tegelijk. De oorzaak was achteraf logisch. We hadden een nieuwe zending briefpapier waar een bepaalde film op zat waar de printer niet tegen kan. Logisch, want het kan niet zijn dat alle 3 printeres tegelijk hetzelfde mankeren.
Ander papier erin. De eerste hoeveelheid zal nog problemen geveb tot der olletjes vrij zijn van de vettigheid.
groeten,

G.Eijken te Hoorn

Posted on Nov 15, 2008

Ekse

  • 13434 Answers

SOURCE: paper jam ,no paper jam found Dell 1815dn

give this a try

  1. Turn off the printer.
  2. Remove any paper trays. Inspect them for wrinkled or damaged paper.
  3. Also open the back cover of the printer if this model has one.
  4. Open any other doors that give access to the printer's paper path and to the toner or ink cartridge.
  5. If necessary, remove the toner or ink cartridge. Place it away from light/ sun light to avoid damaging it.
  6. If you find a piece of jammed paper, remove it by holding it with both hands and pulling firmly. The goal is to keep the paper from tearing. If several pieces are jammed together, try pulling out the middle piece first to loosen the jam.
  7. If the paper does tear, try rotating the roller gears manually to free the paper. Don't force anything, though. Do this step especially if the jam message comes up repeatedly without any obvious paper jam, there may be a small tear of paper inside.
  8. Ones the printer is free of paper Replace the toner or ink cartridge and paper trays, close any doors you opened and turn the printer back on.
  9. If the printer paper jam message still appears, then there is still some paper in the printer. Reinspect the paper path.
  10. see alternative if the problem is still not solved.



alternative :
Load a piece of thick paper, for example photo paper and press the resume button (may be diffrent button on diffrent models) a few times to the printer picks up the paper and puts it through the machine.

Posted on Jun 12, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

That when i print there is doted ink on the paper


Did you check the print head nozzles? every brand has it own way to check the print heads. So yours should have one to.
Sometimes you also need to remove dust, picked up by the print head, but don't try to use tools for that or remove anything from the printer. Just feed some thicker sheets of paper through, without printing.

Mar 15, 2015 | Office Equipment & Supplies

1 Answer

Hp color laserjet cp1525


Here is a link to the HP Support Center Page that describes the Control panel messages for your printer....58.04 is not documented .
Troubleshoot problem for HP Color LaserJet CM2320 Multifunction Printer...

Mar 26, 2014 | HP LaserJet Office Equipment & Supplies

1 Answer

Flashing power light


I have an HP LaserJet Pro CP1525, and that happens when a print job is coming through.

Sep 24, 2012 | Office Equipment & Supplies

1 Answer

OfficeJet Pro 8600 will not pick up glossy photo paper from the tray


I tried everything that was suggested on the HP forum but then tried something not reccommended there and it worked. Not only remove tray 2 from the printer properties but force the print to tray 2, when you this it sets the Quality from normal or Best to Custom. Once I done that it worked... Just disabling the tray 2 is not enough.

Mar 26, 2012 | HP OfficeJet Pro K8600 Printer

1 Answer

Color mixing is not proper


Start, programme,hp cp1525,tool box.. in tool box perform color calibration once its completed check for the print quality.. if its rectified.. end process.. if its not rectified only experts can perform do the calibration through aligning the scanner assembly..

Feb 01, 2012 | HP Laser Jet Pro CP1525N

1 Answer

HP 4100dtn Tray 2 picks the paper NON-STOP?


Step 1:Check with another cartridge
Step 2:Switch off the printer take out tray 2 casette, swich on the machine check while intializing the printer tray 2 pick up roller rotating?.. If its rotating check solnoid which is located right side under the main moto assembly, clean the solnoid as shown in the anap shot..fix it back.
Step 3:Open right ,left & top covers.., close cartridge access door check is it driving the laser scanner shutter?, if not check the sccess door knotch broken/bend.
11_20_2011_9_46_15_pm.gif

Nov 20, 2011 | HP LaserJet 4100dtn Printer

1 Answer

Am confused,i want to buy a colour laserjet printer and left with only two options which one should i buy btn hp1600 and cp1525


hiii
Its depends on your printing needs.Printing quality almost same these two printers. If u buy hp 1600 u will get more pages than cp 1525.But u should think about the toner cost. Check your local market price for each toners.Here i will give u the toner model numbers for ur required printers.

hp 1600 - q6000- black,q6001,q6002,q6003 each three colours.- Page yield 2500 pages for black ,2000 pages each colours.

hp cp1525- ce-320a(128a),ce321,ce322,ce323- Page yield -2000 pages for black,1300 each colour pages.

So I am sure hp 1600 toner very costly than 1525 toner.If u dont have huge volume printing better i suggest u buy cp 1525 model.Also this model offering wirless printing .
U can refill this toners lowest cost and getting good results.
sooooooo cheeeeeeers up........select your new printer. best wishes..........

Jun 14, 2011 | HP Color LaserJet 2600n Printer

1 Answer

I have a toyota 1992 pick up truck and the front suspension is not working properly its too hard. do you know why


You do have bushings & mounts on the entire suspension that have been on the truck for nearly 20 years, more than likely without being replaced. I would recommend a good inspection of all of those for detoriorated rubber, possibly hardened without any "give" as it originally did before being put to use.

These can be replaced w/OEM parts or Poly bushings if necessary, but you'll find the Poly bushings may last even longer, but provide a stiffer ride.

The Struts/Shocks should be tested by simply pushing up & down at each corner of the car & watching the rebound as well as noting the amount of pressure is necessary to cause them to bounce.

good luck

Feb 07, 2010 | 1992 Toyota Pickup

1 Answer

Printer making crunching noise when printing. trouble picking up paper from main tray. keeps asking for paper to be loaded in tray, when its full. help D


It is a hardware problem.Your printer roller & paper sensor are not working properly. So pls checked it from service center

Oct 13, 2009 | HP Photosmart 3310 Printer

Not finding what you are looking for?

Open Questions:

Office Equipment & Supplies Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top HEWLETT-PACKARD Office Equipment & Supplies Experts

Harrie

Level 3 Expert

6746 Answers

Duke Bells

Level 2 Expert

131 Answers

George Mclaughlin

Level 2 Expert

369 Answers

Are you a HEWLETT-PACKARD Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...