Fitting jane powertrack 360

Hi,

Provided that you have the Matrix with the light grey plastic handle, yes. You would require these adaptors to attach the Matrix to the chassis.

http://www.johnstonprams.co.uk/dynamic/viewitem.php?item=C3718

Hope this helps.

hi, just turn the knob a 1/4 turn that is at the top of the wheel.

Approximately 20kg is said to be the upper weight limit or four years old depending on how comfortably they fit in the chair.
This answer is for the Jane Powertrack 360.

Hi,
I would suggest that you visit www.johnstonprams.co.uk and contact them as they are the best people to assist you, good luck!
Hope this helps.

go to www.buggypitstop.co.uk they should have the parts you want

Hi Maureen, if you contact [email protected] they should be able to either post the manual to you or send you a downloadable PDF.

I think the instructions you get with this seat are really poor - the best place to find them is on U-tube. There is a full demonstration of how to fit the seat in both the lie flat and rear facing mode. I have followed this for both modes and it is really easy to understand.
Hope this helps!

To fit the Jane Capazo Carrycot succesfully, this depends on your car. It needs to use two 3 point seat belts. 2 point seat belts don't work. Plug in both seat belts, and pull the lap belt part through the red catch on both side. Pull as tight as you can. To make car seat fitting more secure, try placing a slip mat like the Sunshine Kids Grip It or Super Mat underneath to hold it in place. These are all crash tested and safe.

there is a small metal handle behind each seat, pull it up while you move the seat into the recline position you want - rear seat has four positions, front seat has two. :) Jan.

Hi,

If you contact www.johnstonprams.co.uk they will be able to help you get a copy.

I hope this helps.