Program simon security system chimes

Troubleshooting a GE Simon XT: Clear Errors and Alerts ...

? 3:06
https://www.youtube.com/watch?v=AtOCuthlsTo
Oct 3, 2011 - Uploaded by LiveWatch Security
Troubleshooting a GE Simon XT: Clear Errors and Alerts -Wireless Home Security ... Many times the Simon XT panel willbeep to indicate there is something ... How do you turn off the warning beep when you turn on alarm? I find it very useless and annoying. Can't seem to find a way to turn that feature off.

My Simon XT is beeping every 4 hours. How can I stop it ...

help.livewatch.com/.../20399861-My-Simon-XT-is-beeping-every-4-ho...

Aug 28, 2011 - If your panel has been beeping throughout the day and you want to turn off ... Scroll down on the Simon XT until you see "System Programming".Missing: control ‎hello ‎control ‎box

You need to activate the voice chime , option 2
Get in to the program and enable that option.

there is an auto arm feature programmed in to the system. Check your setting and the system clock.

No,sorry they are totally differnce in system datas programming.

It sound like you are programming the sensors as a 24 hour zone. They need to be either a type 10 (entry exit) or type 11 perimeter.

Alarmprofessor.net

the sensor is going out, i would switch it out with another one in your house and see if the problem follows it there.

Is the "chime" feature enable for that device?

This is from page 19 of the Simon3 manual found here:
http://www.safemart.com/manuals/simon3.pdf

It appears you have the "CHIME on Motion" enabled. Follow the Option 41 steps to disable it.

Option 41 - Voice Chime
The panel will verbally announce which chime sensor has been tripped if the chime
feature is on.
Add enables chime voice.
1. Open panel cover. Panel announces, Use numbered keys to enter ID.
2. Enter Access Code using the numbered keys. Panel announces, Please select from
Start Menu.
3. Press Add from the Start menu. Panel announces, Select from main menu
4. Press Option #. Panel announces, Option 1, press again for next option or done to
select.
5. Press 41. Panel announces, Option 41, press again for next option or done to
select
6. Press DONE. Panel announces, Option 41 is on.
Delete disables chime voice. The panel will not announce which chime sensor has
been tripped but will still chime 2 times for doors and 3 times for motion sensors when
a given sensor is tripped.
1. Open panel cover. Panel announces, Use numbered keys to enter ID.
2. Enter Access Code using the numbered keys. Panel announces, Please select from
Start Menu.
3. Press Delete from the Start menu. Panel announces, Select from main menu
4. Press Option #. Panel announces, Option 1, press again for next option or done to
select.
5. Press 41. Panel announces, Option 41, press again for next option or done to
delete
6. Press DONE. Panel announces, Option 41 deleted.

According to my manual.

>Turn Chime Doors on:
1. System must be disarmed. Press Chime Doors button.
panel will announce,"Chimes On". Chime Doors button will be lit.

> Turn Chime Doors off:
1. Press Chime Doors button.
panel will announce, "Chime off". Chime Doors button no longer lit.

Depends. Do you mean the chime? If all that is missing is the chime whenever a zone is tripped then simply press the CHIME button on the front panel. If it is lighted solid red then your chime is on and it will talk to you. If chime is off then it wont talk to you at all when a zone is tripped. Good luck.