I am looking for suggestion of water paddle manufacturing company and person who experienced the Tide surfing.
SOURCE: Water Dispenser for Frigidaire
try mashing the wire end connector gently with a pair of pliers to tightn the connectorer and let me know if it stayes on
SOURCE: Ice Dispenser
Thanks for the reply.
I bit th ebullet and called out the GE repair man. Luckily though, there was a problem with the printed Circuit Board, which was actually a recall, so th eboard was replaced for free and my fridge now works.
Cheers
SOURCE: Water Dispensing Paddle
My water dispensing paddle also snapped off. Where to get replacement part and how to replace? what's the cost?
SOURCE: I have a stainless steel Frigidaire side-by-side
the front cover will come off. if you dont see any screws then it WILL unsnap. look for a slot on the top or bottom of the cover. good luck some of them can be nasty
SOURCE: Frigidaire PLHS68EESB6 PROFESSIONAL SERIES- WATER
If you go to http://www.partselect.com/MultiModels.aspx?ModelNum=plhs68ees&searchTerm=img_FP9IOK75&RefineSearch=0&imgMfg=Frigidaire&Page=2 you can see how the part is installed. The part cost $80.61 + sh. and is part #24. By looking at the diagram you will also see how to get the part out. Good luck
No actually it is better to paddle board on less choppy water and flat water is preferred when beginning to practice your skills.
90 views
Usually answered in minutes!
×