SOURCE: setting station presets on Sangean ATS 505
A copy of the manual is at
http://download.qrz.ru/pub/hamradio/schemes/receivers/DX-398_Owners_manual.pdf
or you could enter dx 398 manual into google.
best regards apritt
SOURCE: Wiring schematic for Sangean ATS 818cs
Yes, go to:
www.thiecom.de/ftp/sangean/ats818/ats818acs-servicemanual.pdf
SOURCE: I have broken the aerial on the radio SANGEAN ATS
Radio Shack sold the same radio as the DX-390 and parts may be gotten from there.
SOURCE: I have a Sangean ATS 818cs portable radio but no 6v lead input
Yes you can use any 6 volt DC for your radio but the most IMPORTANT thing to remember is to connect the terminals in the correct direcction. First of all you can solder a red wire from the positve terminal of the battery and a black wire from the negative terminal of the battery. This must be connected to the source of your 6 volt battery.You can buy a good DC jack socket female to be fitted into the vacant spot of your radio and use a male jack to supply the DC. Only be carefully to see the polarity. To avoid any reversing of polarity use can even connect a diode in the forwarrd bias towards the positve terminal. This will prevent any wrong connection of polarity to damage your set. Helpful? Good day
211 views
Usually answered in minutes!
×