Searching on Google on how to access the fuse I found a page that
showed you how to reset the counter without replacing the fuse. It
was simple, access the TECH menu and select NEW CARTRIDGE. Here are
the instructions: [menu] - [#] - 1934 - [menu] Then select “NEW CARTRIDGE”
First remove the fuse from the toner (a small glass tube in the toner front side) then replace a 500ma fuse put into the printer then restart the printer will display CPU fuse error
you remove the fuse from the toner, place the no fuse toner to the printer can be normal use.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I would not advise you to refill a toner cartridge becausethe toner powder is very fine and you do not want to breath in this tonerpowder.
When the toner cartridge is exhausted or empty then theprinter will not be able to print further documents or the prints will be veryfaint.
You may be able to print a few more pages by removing thetoner cartridge and shaking the toner cartridge in a horizontal position a fewtimes and then placing it back into the printer.
This will give you an opportunity to print a few more pages and giveyou time to purchase a new toner cartridge for your printer. A cheaperalternative is to purchase a re-manufactured toner cartridge for your modelprinter.
A re-manufactured printer cartridge also replaces worn partsas well as refilling with toner powder.
you have received faxes, but they can't be print until you replace toner because probably you have TONER EMPTY message also on the display.
You can buy only fuse for toner cartridge (25mm, 250V/ 0,063A or 0,1A and maximum 0,125A)
When you pull out toner cartridge you will see the glass fuse on the front left side of the cartridge.
The new fuse will reset toner empty condition pifonski
You printer has run out of toner, you need to purchase a new toner cartridge or a re-charged toner cartridge. Re-charged toner cartridges are cheaper that a new one. You can get a few more prints out of your empty toner cartridge by removing the toner cartridge out of the printer and shake it, don't tilt it on the end, just shake it in a horizontal position and then put it back inside the printer. You should be able to get several more printer pages.
If you are using refilled cartridges those errors are common, Samsung has an eeprom on the cartridge keeping track of usage and you need a new chip from the refillers. If you are using OEM cartridges you need to clean the contacts inside the machine that the cartridge connects to and wipe the contacts on the cartridge before installing, Otherwise a shop repair for the CRUM circuits.
You will need to manually reset the toner cartridge. If the Toner Low or Toner Empty message does not automatically clear after a new cartridge is installed, do the following to clear the message manually:
Press MENU # 1 9 3 4 in sequence
rapidly. The LCD panel should now display TECH.
Press MENU, and then press ENTER. The LCD
panel will display Tech Mode.
Press the left arrow (<) button once. The operator panel will display NEW CARTRIDGE.
Press ENTER. The operator panel will display [YES].
Press ENTER. The toner warning message should be gone.
To exit TECH MODE,pressMENU # 1 9 3 4 in rapid succession, as if you were dialing a phone number. The operator panel should no longer display TECH.
If problem persists, there
may actually be a problem with either the toner cartridge or the SCX-4216F.