Question about Audio Players & Recorders

1 Answer

Samsung model:ht-tz122,error message: "prot" - Audio Players & Recorders

Posted by Anonymous on


1 Answer

Anthony Tang

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Where is the amp located?

Posted on Aug 31, 2014


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Unlock samsung HT-TZ122 dvd player

It works for me and my Samsung HT-TZ122
Follow the steps below:

1. turn on and wait for the "NO DISC" message
2. press <stop> button for 5 secs
3. blink light noted
4. press "<enter>", "<8><4><2><6><9>" then "<enter>"
5. shut down unit and restart

Nov 13, 2011 | Audio Players & Recorders

1 Answer

I have a samsung dvd player, can't specify which one. When I try to turn in on to put DVD, I get a this message PROT

Typically on Samsung units, if you get the PROT error it means PROTection. This means there is a short or hardware failure somewhere. If you are under warranty you need service. If its an old unit, you need a new one.

Jun 17, 2011 | Samsung Televison & Video

1 Answer

I am looking for an unlock code for a Samsung HT TZ122 Home Theatre System to allow me to view DVDs from various regions

1: Turn DVD player on, with NO DVD in the tray.

2: Press Repeat on remote control (bottom right key)

3: Enter 76884

4: Press 9

5: Open tray, close tray

6: Turn off DVD player, turn it back on.

Mar 11, 2011 | Samsung HT-Z210T Theater System

1 Answer

I have a samsung HT-Z120 it show a PROT error


This error means that you are trying to play a region-protected disc that is not in the same region as your player.

It is possible to "hack" the region on your DVD player by following these instructions:

Please rate my answer.



Mar 05, 2011 | Samsung HTP-1200 System

2 Answers

When i turn on my Samsung HT-C550 IT showing PROT and DVD turn off. What this is mean PROT?

PROT means that the AMP is protecting itself from damage due to bad or incorrect wiring or damaged and or incorrect speakers. Check your wiring and speakers.
If you find no problem then, DISCONNECT YOUR SYSTEM FROM THE POWER, disconnect your speaker wires...all of them, then reconnect the power ONLY, turn on the system and see if it still says PROT. If it does then your amp is damaged.

Feb 20, 2011 | Samsung HTC550 Theater System

1 Answer

Whatb does it mean when the PROT comes on and then shuts off the dvd player

hello, prot mean protect the output transistor may have blown or a capacitor has poped or swelled up or the just could be a case of a dry joint


Nov 22, 2010 | Samsung HT-X50 System

2 Answers

Samsung ht c550, enciende, saluda, lee y aparece el mensaje PROT y se apaga.

when i turn on my Samsung HT-C550 IT showing PROT and DVD turn off. What this is mean PROT?

Oct 11, 2010 | Samsung HTC550 Theater System

3 Answers

HT-Z320 displays PROT code and then shuts down

i had the same problem a prot display then it would shut down. turns out i had the sub disconnected(noise complaint from the shaking at my apartment complex) but the speaker wires for the sub connected to the amp or central unit. when i disconnected the sub i left the wires on the floor behind the sub separating the pos. and neg. somehow the wires got moved around and the pos was touching the neg. as soon as i noticed and fixed this problem the system was working fine. my samsung hometheater model is HT-BD1250

Dec 29, 2009 | Samsung HT-DB120 System

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts


Level 3 Expert

5700 Answers

The Knight
The Knight

Level 3 Expert

76466 Answers


Level 3 Expert

85239 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides